Gauge of Mighty Cord 5th Wheel Wiring Harness A10-7007

Question

Question:

What gauge is the wire on this item?

asked by: John

0

Expert Reply:

The Mighty Cord 5th Wheel/Gooseneck Wiring Harness w/ 7-Pole Connector - 7' Long # A10-7007 uses 10, 12, and 14 gauge wires. This gauge - between 10 and 14 - is fairly standard on 5th wheel wiring harnesses like this.

expert reply by: Kyle S

0

Answer 1

I am not sure of what the factory tow package plug on your 1988 Ford F-350 looks like so if you send me a photo I may have a different option for you but if it looks like the one in the attached photo then you can use the Mighty Cord 5th…

view full answer...

Answer 2

The Dexter Heavy Duty Suspension Kit #K71-360-00 is designed for 33 inch axle spacing. To add your third axle, you cannot simply add a hanger spring and axle. You can keep your 35 inch spacing but you will need to relocate your hangers. I've…

view full answer...

Answer 3

The Stromberg Carlson RV Exterior Ladder w/ Hinges - Aluminum - 99-1/2" Tall x 12" Wide #LA-401 is a universal fit ladder that will fit most coaches. This is the only exterior ladder style we have available; it's also available in black…

view full answer...

Answer 4

I did a little research and found that your 2003 Venture Boat trailer model 2250 has a capacity of 2,250 pounds but the 6-lug hubs and bearing information I found indicate that it uses hubs normally seen on 5,200 pound axles. Since you have a boat…

view full answer...

Answer 5

We don't have a 7-way splitter like the photo you sent. We instead for applications just like yours recommend using the Mighty Cord 5th Wheel/Gooseneck Wiring Harness w/ 7-Pole Connector - 7' Long #A10-7007 or the 10 foot long #A10-7010. This…

view full answer...

Answer 6

The most well equipped 2012 Ford F-350 Single Rear Wheel (SRW) has a 14,000 lb conventional towing capacity and a 5th wheel/gooseneck towing capacity of 16,700 lbs. In order to find your exact towing capacity the best method would be to find the…

view full answer...

Answer 7

The best spot to install the Trailer Connector is on the bed sidewall on the drivers side, between the wheel well and the tail gate. We have an installation video showing this Curt 5th Wheel and Gooseneck Wiring Harness #C56000 being installed on a…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Gauge of Mighty Cord 5th Wheel Wiring Harness A10-7007

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching