Locking the MORryde Orbital Rotating Pin Box to use Andersen Ultimate Connection 5th Wheel Hitch

Question

Question:

I have a mor/ryde orbital pinbox on my 2019 Arctic Wolf 315tbh8 and I would like to install the Andersen 3200 on my 2020 Ram 1500. If I leave the lockout bolts in place on my orbital it will not pivot, can I use the Andersen 3200

asked by: Marc

0

Expert Reply:

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System, # AM3200 is not compatible with rotating pin boxes. But the MORryde Orbital Rotating Pin Box has lockout bolts that allow it to become a standard pin box so you can use an Andersen, # AM3200 if you want.

expert reply by: Michael R

0

Answer 1

Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter part #AM3200 that we carry fits industry standard fifth wheel rails in the cab of the truck. We currently do not carry the Andersen Gooseneck Version of the Andersen Ultimate…

view full answer...

Answer 2

The head of the Demco Recon 5th Wheel Trailer Hitch #DM8550043, which can be found as part #DM6169, weighs about 47 lbs. The base, which is part #DM6180, also weighs in at about 47 lbs. This puts the total weight of the Recon just under 100 lbs.

view full answer...

Answer 3

The short legs of the Andersen Ultimate Connection 5th Wheel Trailer Hitch #AM3200 are located closer to the tailgate per the included diagram from their installation instructions. This design helps to aid in providing the additional turning…

view full answer...

Answer 4

Yes, you can use the MORryde Cushioned 5th Wheel Pin Box #MR84VR with the Curt CrossWing Lightweight 5th Wheel Trailer Hitch #C86JR.

view full answer...

Answer 5

The Andersen Ultimate Fifth Wheel Connection Adapter part #AM3200 that you referenced has 9 inches of offset built into it. What that means is that ball that connects to the trailer's pin box is moved back 9 inches from the center line between…

view full answer...

Answer 6

The Demco Hijacker Autoslide 21K #DM8550038 weighs approximately 305-lbs. The head of this hitch weighs around 70-lbs and can be removed to help make moving and installing this 5th wheel hitch a little bit easier.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Locking the MORryde Orbital Rotating Pin Box to use Andersen Ultimate Connection 5th Wheel Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching