Is The MORryde Cushioned 5th Wheel Pin Box Compatible With Curt CrossWing 5TH Wheel Hitch?

Question

Question:

Will this pin box work with the Curt Crosswing hitch? Thanks

asked by: Mike D

0

Expert Reply:

Yes, you can use the MORryde Cushioned 5th Wheel Pin Box # MR84VR with the Curt CrossWing Lightweight 5th Wheel Trailer Hitch # C86JR.

expert reply by: Bud M

0

Answer 1

The MORryde Cushioned 5th Wheel Pin Box #MR84VR is going to be the same length of 17-3/4" from the center of the king pin to the center of the front mounting bolts. Do understand this measurement is the horizontal distance only and does not…

view full answer...

Answer 2

The correct MORryde Cushioned 5th Wheel Pin Box for a Grand Design Reflections 337RLS is part #MR84VR. This pin box will do a wonderful job of helping smooth the ride due to the internal cushioning which reduces road shock.

view full answer...

Answer 3

Thank you for that information with the photo, and I reached out to Lippert to find the pin box you have, and they told me that you had a Lippert 1621HD pin box. We do have the MORryde cushioned pin box that will work as a replacement with the…

view full answer...

Answer 4

The correct MORryde Cushioned 5th Wheel Pin Box for a 2021 Grand Design Reflection 367BHS is part #MR84VR. The Lippert 1621 and 1621HD are interchangeable.

view full answer...

Answer 5

The Grand Design Reflection 337RLS has a GVWR of 13,995 lbs. This is right in the middle of the MORryde Cushioned 5th Wheel Pin Box part #MR74VR for 11,501 lbs to 14,000 lbs or part #MR84VR for 14,001 lbs. If you wanted to do things completely by the…

view full answer...

Answer 6

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System, #AM3200 is not compatible with rotating pin boxes. But the MORryde Orbital Rotating Pin Box has lockout bolts that allow it to become a standard pin box so you can use an Andersen,…

view full answer...

Answer 7

The head of the Demco Recon 5th Wheel Trailer Hitch #DM8550043, which can be found as part #DM6169, weighs about 47 lbs. The base, which is part #DM6180, also weighs in at about 47 lbs. This puts the total weight of the Recon just under 100 lbs.

view full answer...

Answer 8

Yes, the Curt Crosswing fifth wheel hitch part #C86JR is compatible with the cushioned MORryde pin boxes. The only MORryde pin box it's not compatible with is the pivoting Orbital pin box.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...