Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
(185 reviews)
Price: $229.07
In Stock
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Item # 65022
Retail:$484.89
Our Price: $229.07
You Save: $255.82
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (185)
- Q & A (0)
- Photos
- Used (1)
Draw-Tite Front Receiver Hitch - 65022
- Front Mount Hitch
- Custom Fit Hitch
- Draw-Tite
- 9000 lbs Line Pull
- 500 lbs Vert Load
- 2 Inch Hitch
- Square Tube
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
65022 Draw-Tite Front-Mount Trailer Hitch Receiver
65022 Hidden Hitch Front-Mount Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2000 - 2005 Ford Excursion
- 1999 - 2007 Ford F-250 Super Duty
- 1999 - 2007 Ford F-350 Super Duty
- 1999 - 2007 Ford F-350, 450, and 550 Cab and Chassis
- 2008 - 2008 Dynamax Isata Touring Sedan F Motorhome 255 - Powerstroke
- 2008 - 2008 Dynamax Isata Touring Sedan F Motorhome 255 - Triton
- 2008 - 2008 Dynamax Isata Touring Sedan F Motorhome 270 - Powerstroke
- 2008 - 2008 Dynamax Isata Touring Sedan F Motorhome 270 - Triton
- 2008 - 2008 Dynamax Isata Touring Sedan F Motorhome 274 - Powerstroke
- 2008 - 2008 Dynamax Isata Touring Sedan F Motorhome 274 - Triton
- 2008 - 2008 Dynamax Isata Touring Sedan F Motorhome 310 - Powerstroke
- 2008 - 2008 Dynamax Isata Touring Sedan F Motorhome 310 - Triton
- 2008 - 2008 Dynamax Isata Touring Sedan F Motorhome 312 - Powerstroke
- 2008 - 2008 Dynamax Isata Touring Sedan F Motorhome 312 - Triton
- 2007 - 2007 Dynamax Isata Touring Sedan Motorhome 255 - Powerstroke
- 2007 - 2007 Dynamax Isata Touring Sedan Motorhome 255 - Triton
- 2006 - 2007 Dynamax Isata Touring Sedan Motorhome 270 - Powerstroke
- 2006 - 2007 Dynamax Isata Touring Sedan Motorhome 270 - Triton
- 2007 - 2007 Dynamax Isata Touring Sedan Motorhome 274 - Powerstroke
- 2007 - 2007 Dynamax Isata Touring Sedan Motorhome 274 - Triton
- 2006 - 2007 Dynamax Isata Touring Sedan Motorhome 310 - Powerstroke
- 2006 - 2007 Dynamax Isata Touring Sedan Motorhome 310 - Triton
- 2007 - 2007 Dynamax Isata Touring Sedan Motorhome 312 - Powerstroke
- 2007 - 2007 Dynamax Isata Touring Sedan Motorhome 312 - Triton
- 2007 - 2007 Dynamax Isata Touring Sedan Motorhome 350 - Powerstroke
- 2007 - 2007 Dynamax Isata Touring Sedan Motorhome 350 - Triton
- 2006 - 2006 Dynamax Isata Touring Sedan Motorhome 354 - Powerstroke
- 2006 - 2006 Dynamax Isata Touring Sedan Motorhome 354 - Triton
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 65022
Average Customer Rating: 4.7 out of 5 stars (185 Customer Reviews)
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Darin04/30/2023
2004 Ford F-250 Super Duty
Added to use with a front winch. The install was not too difficult and the included instructions were spot-on. On my F250, the front tow hooks add to the strength of holding the hitch to the frame. On the F250 you do lose the OEM fog light location, but I used the wiring to add/relocate after-market fog lights. The set up has already proven helpful, pulling me out of a snow back while plowing. Just what I needed for some summer off road camping as well.
by: Fabian 05/09/2024
2005 Ford F-350 Super Duty
Great product! Fit perfectly on my 2005 F350. Instructions were easy to follow and it's possible to do it singlehandedly. Thanks trailer!
by: Jerry W.10/16/2016
2003 Ford F-250 and F-350 Super Duty
I chose this product because it was among the more inexpensive front hitches I could find. I plan to build a t-bar for it and use it in conjunction with a homemade headache rack to carry 16 foot garage doors. Like other reviews and vids I have found, the bolt up is hard. I reversed the bolts and use the new ones on the outside, as well as removing my grill. My truck is a 2003 - so not much room like the 2008 and newer trucks.
Jerry W.
10/20/2017
product works fine no issues
by: Hatchetman05/07/2024
Awesome front hitch. Looks pretty solid. Can’t wait till I have to winch my truck out with it
by: Phil10/18/2021
2006 Ford F-250 Super Duty
1. Not sure why the box needs to be so big for this hitch? This hitch is long and narrow, but the box looks like it’s for a 55-inch TV! What a waste. There is so much room in the box, the hitch was not secured, broke loose and penetrated the box. The hitch had some minor damage. Not worth to return it.
2. I read reviews from other web sites that this hitch and or the truck may need to be modified to get the hitch to fit. This is true for me. I had to cut and file notches on the driver’s side frame bumper plate to get the new hitch bolts to line up.
3. Overall, if it wasn’t for the modification, it would have been an easy install.
by: Wayne02/28/2018
Item shipped in timely manner and in great shape. Directions were straight for word and understandable. Two bolts were hard to access behind bumper. Viedo was a great help and very useful in install of hitch. Service was great and price was right. Was very pleased with my purchase and installation. Will be used for portable winch on front of truck.
by: Bob B. - etrailer.com Employee11/14/2013
Pontiac Trans Sport Van
Perfect fit, don't even notice it is there. You do have to relocate your front plate if required to have one in your state. I use mine to transport (or just play music from the front) cargo carrier mounted speakers and sub. I also have a hitch mounted Superwinch and the front hitch allows me to recover from the front and rear of the truck.
by: Jay F05/24/2019
awesome fit ! Installed with ease ! will come in handy when launching boat with camper on. Highly recomend this place for all your towing needs amonst other items . Thanks Guys job well done !!!
by: Mario06/06/2021
First time I used it, my F-250 was knee-high mud, the Draw Tite held together and with the winch pulled me out, so I need another one for my F-150. 110% Satisfied, highly recommend it.
by: Jon04/16/2024
2004 Ford Excursion
I have not installed the hitches on my truck but they look to be well made and will replace the OEM hitch just fine assuming it fits.
I did lower the rating because of the shipping. BOTH hitches came by LTL UPS Freight and BOTH hitches were delivered out of their boxes. The had ripped through the side or end of cardboard box. UPS carried the hitches up to the garage and then placed the boxes over them. I am hopefully that all the hardware and instructions were delivered.
After I get them installed in a couple weeks we'll see how the rest of the story goes.
by: Dean08/01/2020
2000 Ford Excursion
Top quality and solid. Unfortunately, I did have to remove my stock fog lights, which is a real bummer, but I really needed a hitch up front to carry bicycles. READ the directions on this one the order is important.
by: Mike P09/04/2023
2007 Ford F-350 Super Duty
Having read reviews about the packaging not being good ,I was really surprise just how well it was packed in a heavy duty cardboard box and I mean heavy duty! very pleased with that quality of the hitch cannot fault it ,where I had the biggest problem was drilling the 5/8 holes took a bit of time ,and of course the time spent trying to get the bolts lined up once the bumper was in stalled very tricky indeed ,where I think I had a strke of genius was to use alien tape to hole the plates behind the bumper but you really have to clean the area to stick too ,apart from that ,very pleased with the unit and the way it looks,its really well made
by: Terry04/28/2022
Just what I needed. I have a 5th wheel with no good way to put a hitch on. I bought the front receiver to haul my bicycles in front of the truck. Works very well, Was a little bit of work getting in on the truck but fit well. With a receiver on front and rear of my truck I can use a winch on either end if needed. I would recommend for anyone with some basic skills. Some drilling required and maybe 2 sets of hands. Have used it many times and am very happy with it.
by: Mike 03/20/2024
Great quality. A little time consuming to install but worth it.
by: Diana07/13/2020
Installed on a 2001 Ford F-250. Relatively easy installation. It took about 8 hours to complete. The only ‘mistake’ I made was tightening down the receiver before reinstalling the tow rings. The lower edge of the receiver hitch will prevent access to the forward bolts of the tow rings. I was able to loosen the hitch enough to tighten the rings down. The hitch fits perfectly, and no new holes were needed. My only complaint is packaging of the hardware—some of it was loose in the box and I managed to lose a washer. Other than that, I’m am very happy!
by: Will08/20/2022
Perfect fit and look on my 2000 Ford F350 4x4 Crew Cab. Great price, fast shipping and excellent customer service. Not noticeable from the front unless you put in a receiver plug like my NRA plug. Just make sure you watch the install video on YouTube and you have the proper tools... LOL.
by: Jason07/16/2023
2000 Ford F-250 Super Duty
Overall item seems built well, but packaging was destroyed and unit came dented and scratched. UPS driver said parts were falling out of box.. poor packaging caused a scratched and dented delivered product.
Jenny N.
7/19/2023
Oh no! I will have our Customer Service team reach out to you.
by: Michael11/25/2019
Good products. Hitch hides well when not in use. When I have my camper on back I can take my dirt bike on the front. Installation as shown on the videos. etrailer was easy to use and fast shipping. I will use them again and recommend them to anyone.
by: George 02/22/2024
It is big and hard and the chicks dig it. Thanks trainer
by: Dave11/02/2019
Only thing I could say negatively is that I have to remove my front license plate to use the receiver. Not sure how to remedy that as in California, front license plates are mandatory.
Installation took some modification but with the help of another person, it went well.
by: Russell Schenck10/30/2011
2006 Ford F-250 and F-350 Super Duty
Delivered on time and all parts were accounted for even though the boxes were destroyed from shipping.
This unit, along with the item MX600 installed very easily and quick. I'm just bummed I have to refit or replace my OEM fog lights.
Overall I will get many miles of use from this hauling my Honda 230, now I can keep my T/T hooked up and still access the bike.
Russ
by: Hal05/01/2017
2001 Ford F-250 and F-350 Super Duty
Great price, and a great product.
I plan on using it to carry a bike rack.
If you have a Powerstroke, save yourself a couple of hours of work and remove the front cross member, or recruit somebody with really thin forearms and hands to help get the two inside bolts tight.
by: Randy 03/12/2024
2007 Ford F-250 Super Duty
Shipping was extremely fast and the product is very well made.
by: Paul09/28/2019
2004 Ford F-250 and F-350 Super Duty
The product was great and the service and delivery are excellent. The only slight problem was in the video where they made the process of attaching the receiver sound easier than it was. My brother helped me and we have all the tools needed and are good at that kinda of stuff. But some of the procedures were difficult.
by: John04/07/2021
Not super straightforward installation and I haven’t used it yet for the intended purpose but I think I is a very beefy and well placed accessory. I think I love it!
25
185
Show More Reviews
See what our Experts say about this Draw-Tite Front Receiver Hitch
- What Vehicles Does Draw-Tite Front Mount Trailer Hitch, # 65022, FitThe Draw-Tite Front Mount Trailer Hitch, # 65022, has been confirmed to fit the following vehicles 2000 - 2005 Ford Excursion 1999 - 2007 Ford F-250 and F-350 Super Duty 1999 - 2007 Ford F-350, 450, and 550 Cab and Chassis I am attaching a video of the hitch being installed on a 2003 Ford F250 to give you an idea of the process.
view full answer... - Do Fog Lights have to be Permanently Removed to Install Front Hitch on a 2003 Ford ExcursionThe factory fog lights on the 2003 Ford Excursion cannot be reinstalled after installing the Draw-Tite front mount trailer hitch # 65022. You could always add aftermarket fog lights using kit # QH-84CF and mount them in a different location.
view full answer... - What E-Bike Rack has the Lowest Rise to Mount on a Front Hitch of a 1999 Ford F-350? While all of our e-bike racks have a step/rise, there is one rack that sits lower than the rest. That is the Thule EasyFold XT # TH903202. From the center of the hitch pinhole to the lowest part of the platform, this rack measures 6" inches tall. I went ahead and attached a photo that shows this measurement highlighted. The EasyFold XT not only comes with a 65 pound maximum per-bike weight capacity, it also comes with an integrated ramp that allows you to simply roll the bikes onto the...
view full answer...
- Comparing the Curt Front Hitch 31114 and the Draw-Tite Front Hitch 65022 for a 2000 Ford F-250There are virtually no structural differences between the Curt Front Mount Trailer Hitch Receiver part # 31114 and the Draw-Tite Front Mount Trailer Hitch Receiver part # 65022 for your 2000 Ford F-250. They both install in the exact same location and allot for a 500/5,000 Lb vertical load and line pull rating. The main reason for the price difference is that the Curt hitch is made in the USA and has a more resistant powder coating. I have attached a sample install video for you as well.
view full answer... - Recommended Front Mounted Hitch for 2006 Ford F-250I can help and there is a front mounted hitch that is a fit for your 2006 Ford F-250 and I recommend the Draw-Tite # 65022, which will sit in the opening through the front bumper. It is a 2" hitch with 9,000 lbs of line pull and a vertical load capacity of 500 lbs. The only thing to keep in mind is that installing a front hitch on your F-250 will require you to remove the OEM fog lights to allow the hitch to mount. I've added a link to a video install of this hitch for you to take a look...
view full answer...
- Front Receiver for 2000 Ford F250 4x4If you do not have the blocker bar or sub-bumper behind the air dam, the Draw-Tite # 65022 would a good choice for your 2000 F250. According to the installation instructions, the tow hooks are temporarily removed but are re-installed later in the process. The Curt front mount receiver, part # 31114 will also work. It is nearly identical and would install in the same manner. I have provided a photo showing what the receiver would look like once installed.
view full answer...
- Availability of a Front Mount Hitch for a 2002 Ford F-250 Without Removing the Factory Fog LightsThe 2002 F-250 has two different styles of front end configurations. If your front end has the blocker beam behind the front bumper and the leaf springs mounted on the inside of the frame rails then you would use the Curt Front Mount Trailer Hitch Receiver, item # C31014, which will allow you to retain your factory fog lights. If your truck does not have a blocker beam installed and the springs are mounted underneath the frame, from the factory then you could use the Draw-Tite Front Mounted...
view full answer... - Availability of Grille Guard with Winch Mount for 2005 Ford F-250/F-350I recommend the Westin Sportsman Grille Guard # 40-1645 The only option to mount a winch on the front of your truck is to add a custom front mount hitch part # 65022 and then add a winch mount like # BDW20011. You'll want to install the hitch before you install the grill guard. There aren't any options for a grill guard with an integrated winch mount plate available for the 2005 Ford F-250/F350 Super Duty.
view full answer...
- Availability Of Front Mount Trailer Hitch For 2019 Fleetwood Flair 32S For Carrying Two E-Bikes I may have another option for you, but there is not a custom fit front mount trailer hitch receiver confirmed to fit your 2019 Fleetwood Flair 32S. Instead you will need to go with a universal hitch option like the Draw-Tite # 41990-07 with 7" tall mounting brackets or the # 41990-16 with 16" tall mounting brackets. A qualified welder will need to install the hitch, and you will want to use there recommendation on the capacity of the hitch. The hitches themselves have a 1600lb tongue...
view full answer... - Front Mount Hitch Recommendation for a 2005 F-250 or F-350 to Use a Motorcycle CarrierFor your 2005 Ford F-250 or F-350 Crew Cab the only front mounted hitch that we offer is the Draw-Tite # 65022, please note that this front mount hitch receiver has a maximum weight limit of 500 pounds of vertical load. I have included the installation instructions for this hitch. Please note that your front fog lights will need to be removed for the hitch installation, and can not be re-installed and used while the front mount hitch is in place. The tow hooks will also be removed for...
view full answer... - Will Front Mount Draw-Tite Hitch Part # 65022 Fit a 1999 Ford F-250 Heavy DutyThe cab and chassis models leave the factory with with the normal style cab, but no bed. The cab and chassis models are frequently fitted with aftermarket beds. If your bed is the standard style of truck, it is not a cab and chassis. If this is the case, the Draw-Tite Front Mounted Trailer Hitch Receiver, part # 65022 would be a fit for your 1999 Ford F-250.
view full answer... - Available Front Mount Trailer Hitch Options for a 2000 Ford ExcursionThe only available front mount trailer hitch options we can confirm fit on a 2000 Ford Excursion is the Draw-Tite Front Mount Trailer Hitch Receiver part # 65022 and Curt Front Mount Trailer Hitch Receiver part # 31114. Unfortunately, we are not able to confirm fit of any other trailer via modifying as this would void the warranty of the hitch.
view full answer... - Will the Draw-Tite Front Hitch for a 2000 Ford F-250/F-350 Fit Models with 2WD and 4WDThe Draw-Tite Front Mount Trailer Hitch Receiver part # 65022 is listed as a fit for all models of the 2000 Ford F-250 and F-350 so that is what I recommend whether you have 2WD or 4WD. The presence of a blocker beam is not relevant for the Draw-Tite Front Mount Trailer Hitch Receiver as it is for the Curt Front Mount Trailer Hitch Receiver. The Curt Front Mount Trailer Hitch Receivers can get very confusing when trying to determine fit due to the blocker beam and drive type compatibility...
view full answer... - Will The Draw-Tite Front Mount Receiver Fit With Ranch Hand Front Bumper 2000 Ford F-250?We have only fit the Draw-Tite Front Mount Trailer Hitch Receiver # 65022 on models with the stock front bumper. I do see there are different model Ranch Hand front bumpers for your 2000 Ford F-250 and if it is the model with the winch mount the winch bracket does appear to be in the way. You may be able to have the 2" Receiver # E17 welded to your bumper but be sure to contact Ranch Hand for any capacities the bumper is capable of supporting.
view full answer... - Will Curt Front-Mount Hitch 31114 Fit 2003 Ford 550 Four Wheel DriveCurt front-mount trailer hitch # 31114 will fit the 2003 Ford F-550 cab-and-chassis but it will NOT fit the F-550 Super-Duty pickup. No front hitches are offered for the F-550 pickup. Curt hitch # 31114 does require some drilling for installation and it will also require you to remove/relocate the OEM fog lights. We also offer a similar front hitch from Draw-Tite, part # 65022, whose installation is shown in the linked video.
view full answer... - Towing a Trailer and Carrying a Dirt Bike at the Same Time on a 2002 Ford ExcursionI actually have a better solution for you. Take a look at multipurpose ball mount # D210. With this ball mount the tongue weight capacity of the trailer hitch will not be reduced by 50 percent like it would using MT70070. The D210 is rated for 7,500 pounds gross trailer weight and 750 pounds tongue weight total. So the combined tongue weight of the loaded trailer, hitch mount motorcycle carrier, and dirt bike on it cannot exceed 750 pounds. If the dry weight of the trailer is 700 to 900...
view full answer... - Comparison Between Draw-Tite # 65022 and Curt # 31114 Front Mount Receivers for 1999 Ford F250 The primary difference between the Draw-Tite # 65022 and the Curt # 31114 is that they're manufactured by two different companies. The hitches are nearly identical in appearance, have the same weight ratings and would install in the same manner. Because of this, you can choose the less expensive Draw-Tite model, and not feel that you sacrificed anything. If you click the provided link, you can see an install video for the Draw-Tite model.
view full answer... - How to Carry Kayak on Roof of Truck Towing Fifth Wheel TrailerSince your truck bed is occupied by your 5th wheel hitch and since there are no 5th-wheel-mount kayaks carriers the best option is to use a front-mount hitch such as # 65022 along with a load support like # EM07605. This would put much of the kayak's weight on the hitch rather than your roof and would also be a better choice if your kayak is longer than 10-feet or so.
view full answer... - Will Draw-Tite 2-Inch Front-Mount Hitch # 65022 Fit 2006 Ford Super-Duty with Tow HooksThe Draw-Tite 2-Inch Front-Mount Hitch, part # 65022, will fit the Ford Super-Duty pickups for model years 1999 through 2007. It is compatible with pickups that are equipped with tow hooks (but these will need to be removed temporarily and re-installed). If your truck has the optional OEM fog lights these must be removed or relocated for receiver installation. I have linked the written installation instructions for your reference. This front hitch offers a 500-lb vertical load (tongue...
view full answer...
- 6-Bike Rack Recommendation for 2017 Forest River 365 saqb Towed by 2004 F-350Transporting 6 bikes would require a 4-bike rack at the rear of your camper like the Yakima LongHaul RV Bike Rack - 4 Bikes - 2" Hitches # Y02476 with a hitch installed like the # 13703 if one is not present and then a 2-bike rack like the Hollywood Racks # HR200Z mounted in a front hitch on your 2004 Ford F-350 like # 65022.
view full answer... - Front Mount Hitch and Installation for a 2004 Ford F-350The front mount hitch you selected is for the 1992 - 1997 Ford F-250/F-350 Super Duty. For the 2004 F-350, you will need part number 65022. This will require the removal of the fog lights and the license plate mount. This hitch uses the 2 existing holes for the tow hooks and you will have to drill 2 holes in the bumper frame. Tow hooks will be reinstalled with the hitch. Your lower air dam should not be affected by the hitch. Use caution when tightening the handle nuts provided with...
view full answer... - Front Mount Trailer Hitch for a 2004 Ford F-250 for a Snow PlowThe only front mount hitch option for your 2004 Ford F-250 is # 65022. But this receiver will exit in between the tow hooks. I cannot recommend using a custom hitch such as # C31014 for fabrication but you could use fabrication parts to have a custom fabricator make a hitch that will fit. I have linked the hitch fabrication parts we carry. You would just need a crossmember. This is likely going to be less expensive then trying to adapt a hitch to fit.
view full answer... - Front Hitch that Fits 1997 GMC Sierra K1500For a front hitch that fits your 1997 GMC Sierra K1500 you would want the Draw Tite part # 65022 which is the correct fit.
view full answer... - How to Transport 200-lb Scooter on 2006 Ford F-350 Pulling Jayco Pinnacle 5th Wheel TrailerMany hitch-mount accessory items such as cargo and scooter carriers and bicycle racks are not suitable for use on the back of a trailer due to the extreme forces found at the rear of such vehicles. Much in the same way that the rear seat on a bus or roller coaster gets the roughest ride, anything attached to the rear of a trailer will be subjected to forces that could damage it. While we do offer bicycle racks that could work on the back of your 5th wheel, we have no RV-rated scooter carriers...
view full answer...
Do you have a question about this Front Receiver Hitch?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Dustin K
Video by:
Chris R
Video Edited:
Jacob T
Video Edited:
Chad S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Darin
5/1/2024
This is just what I needed for off-road driving. I use it with a removable winch and it also help me pull someone out of a snowbank this past winter.