Block Heater for 2022 GMC Canyon

Question

Question:

Is there a block heater available for the 2022 GMC Canyon?

asked by: John W

0

Expert Reply:

Yes, there is. The Kat's Heaters Custom Fit Engine Block Heater, # KH11811 is a confirmed fit for the 2022 GMC Canyon with a 3.6L V6 Engine. This cartridge-style heater simply clips into the cavity of your engine block. There is no need to remove the core frost plug. I recommend you also order with the Loctite RTV 598 High-Performance Silicone Gasket Maker, # LT37467.

Please note the linked product review and installation video below.

expert reply by: Michael R

0

Answer 1

You would have to remove the cable portion of the Kat's Frost Plug heater like #KH11484 so that you can slip the loop end of the part #KH28405 over it. Then you would plug the cable back in.

view full answer...

Answer 2

The larger side of the Kat's Heaters Plug Cover for Power Cords with 3-Prong Plugs #KH28405 is designed to fit over the 3-prongs of a power cord that would plug into a wall outlet. The other smaller end is designed to fit over that plug and…

view full answer...

Answer 3

I'd be happy to help with the installation of your Kat's Heaters Custom Fit Engine Block Heater #KH11811 on your 2022 Chevrolet Colorado. While underneath your 2022 Chevrolet Colorado on the back side of your engine block you will need to…

view full answer...

Answer 4

The Kats Heater #KH11811 is a cartridge style engine block heater that DOES include the AC power cord shown on the item's web page and in the attached photo. This 400-watt engine block heater can be used with a water/antifreeze blend (but not…

view full answer...

Answer 5

Yes, the Kat's Heaters Custom Fit Engine Block Heater part #KH11811 is a confirmed fit for the 3.6L V6 engine in your 2017 GMC Canyon. According to Kat's, the block heater will need to be installed on the rear right side of the engine…

view full answer...

Answer 6

The Kat's Heater part #KH11811 that you referenced installs in a cartridge hole on the side of the block. Because of that there is no coolant to drain or anything else. The cartridge hole you'll need to use is the one on the passenger side of…

view full answer...

Answer 7

I checked with Kat's and the correct location to install the Kat's Heaters Custom Fit Engine Block Heater part #KH11811 on a 2014 Chevrolet Impala Limited with 3.6L V6 Engine is on the rear left side of the engine as you can see in the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Block Heater for 2022 GMC Canyon

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching