Is the AC Power Cord Included with Kats Custom Fit Engine Block Heater KH11811

Question

Question:

Does this element come with the cord?

asked by: Jim B

0

Expert Reply:

The Kats Heater # KH11811 is a cartridge style engine block heater that DOES include the AC power cord shown on the item's web page and in the attached photo. This 400-watt engine block heater can be used with a water/antifreeze blend (but not straight 100% antifreeze). Always be sure to unplug the heater and secure the cord before starting your engine.

expert reply by: Adam R

0

click to enlarge

Answer 1

Yes, the Kat's Heaters Custom Fit Engine Block Heater part #KH11811 is a confirmed fit for the 3.6L V6 engine in your 2017 GMC Canyon. According to Kat's, the block heater will need to be installed on the rear right side of the engine…

view full answer...

Answer 2

The Kat's Heater part #KH11811 that you referenced installs in a cartridge hole on the side of the block. Because of that there is no coolant to drain or anything else. The cartridge hole you'll need to use is the one on the passenger side of…

view full answer...

Answer 3

I checked with Kat's and the correct location to install the Kat's Heaters Custom Fit Engine Block Heater part #KH11811 on a 2014 Chevrolet Impala Limited with 3.6L V6 Engine is on the rear left side of the engine as you can see in the…

view full answer...

Answer 4

Yes, there is. The Kat's Heaters Custom Fit Engine Block Heater, #KH11811 is a confirmed fit for the 2022 GMC Canyon with a 3.6L V6 Engine. This cartridge-style heater simply clips into the cavity of your engine block. There is no need to remove…

view full answer...

Answer 5

Self-adjusting brakes #AKEBRK-7-SA do not require that you travel in reverse for them to adjust. They can adjust themselves going forward or backward. Keep in mind that even self-adjusting brakes require 1 initial adjustment. You could just install…

view full answer...

Answer 6

Yes, I suggest the Kat's Heaters Custom Fit Engine Block Heater, #KH11811 that is a confirmed fit for the 2019 Chevrolet Colorado and 3.6L V6 Engine. This cartridge-style heater simply clips into the cavity of your engine block. There is no need…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, it will. The Swagman E-Spec Bike Rack for 2 Electric Bikes item #S94FR is rated to be used behind any motor vehicle, motorhome, travel trailer, 5th wheel, or flat towed vehicle. You will have no issues using this behind your Grand Design Imagine…

view full answer...

Is the AC Power Cord Included with Kats Custom Fit Engine Block Heater KH11811

Product Page this Question was Asked From

Continue Researching