Does Reese Fifth Wheel Rail Kit # RP56005-53 Fit Andersen Ultimate Hitch

Question

Question:

will the reese rails #rp56005-53 work with the Andersen hitch? I have a 2015 F350 with the short bed.

asked by: Jared I

1

Helpful Expert Reply:

Yes the Reese fifth wheel rail kit part # RP56005-53 that you referenced does fit with the Andersen Ultimate Fifth Wheel Connection # AM3200 as it provides the rails the Andersen is designed to work with.

expert reply by: Jameson C

1

Answer 1

The Furrion part #FR93FR is close enough to the dimensions of your Atwood GC6AA-9E that it would work great. For a door you'd just need the part #FR43FR.

view full answer...

Answer 2

The Curt Q24 5th wheel trailer hitch #C16245 fits in industry standard above the bed rails. Industry standard rails have mounting slots that measure 22 inches on center front to back (it is actually closer to 21-13/16 inches). Side to side there are…

view full answer...

Answer 3

For your 2004 Ford F-350, your 5th wheel hitch is compatible with the custom install rail kit. I recommend the Reese Quick-Install Custom Base Rails and Installation Kit for 5th Wheel Trailer Hitches #RP50082-58 which has the custom brackets for your…

view full answer...

Answer 4

Since you have the older style Demco fifth wheel hitch FWH 24PA you have to use the Demco Older Style Rails part #DM6014. Then for a bracket kit you'd want the part #DM8552011 which is a custom fit bracket kit for your 2015 Chevy Silverado…

view full answer...

Answer 5

For your 2001 Ford F-350 with a 6-3/4 foot bed, I recommend the Reese Quick-Install Custom Base Rails and Installation Kit #RP50082-58. These are custom-fit rails that are designed specifically for your truck. No frame drilling will be required to…

view full answer...

Answer 6

For your 1999 Ford F-350 Super Duty Long Bed, the Reese Quick-Install Custom Base Rails and Installation Kit, part #RP50082-58, is the correct installation kit to install a fifth wheel hitch in the bed of your truck. The measurement you will need to…

view full answer...

Answer 7

With the 6-1/2 foot bed on your 2004 Ford Super Duty you can use a slider hitch for your fifth-wheel installation. The hitch you need, see link, will depend on the gross weight of the trailer you will be pulling. You will also need to allow for gear,…

view full answer...

Answer 8

Yes, the Reese Quick-Install Custom Bracket Kit part #RP50082 is correct for your 2005 Ford F-250 Short Bed if you have Reese inboard rails (43" long) and won't require any drilling into the frame rail. I have attached a sample install video…

view full answer...

Answer 9

From the tailgate of your truck, to the edge of the rail closest to your cab, it will measure 56-3/8 inches. As long as you have that measurement and as long as the king pin rides above the tool box, you should not have any problem.

view full answer...

Answer 10

It sounds like your Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 16" Door Item #FR98SR is getting too much voltage to it. Your prior gas/electric water heater was most likely taking 120V AC current. You can…

view full answer...

Answer 11

I reached out to my contact at Reese (and forwarded him the picture you attached) and he said that the Quick-Install Custom Installation Kit #RP50082-58 will actually install perfectly. He noted that the spring stop, cable hanger, and additional rod…

view full answer...

Answer 12

Yes, we have a couple different solutions that could solve your problem. Since you have a fifth wheel with rails already in your bed, I would suggest using a Gooseneck plate built for fifth wheel rails like Curt part #16055. If you will be towing…

view full answer...