Gooseneck Hitch Solution for 2008 Chevy Silverado 5500

Question

Question:

Hi, Im in the market for something like this product, BandW Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs for my 2008 Chevy 5500. Although I cannot seem to locate a hitch that will fit my application. Any idea if theres a product that will fit my truck? and/or do you guys make custom hitches, if need be? Thanks for your help, I eagerly await your reply.

asked by: John

0

Expert Reply:

I have an option for you, but there is not a custom fit Gooseneck Hitch that is confirmed to fit your 2008 Chevy Silverado 5500 as our manufacturers do not fit that size truck.

I recommend using the Curt Gooseneck Flat Plate # C65500. This plate is universal and it's normally placed on top of the flat bed, above the rear axle. You'll need to drill holes through the plate, truck bed and into the truck frame. The manufacturer recommends using (grade 5) 1/2 inch hardware to install the plate.

expert reply by: Jameson C

0

Answer 1

You can use the Pollack #PK11700 to install on your gooseneck trailer and create a 7 way plug capable of fitting on the 7 pole round plug that is on a semi tractor trailer truck. For the wiring you can use the Deka Jacketed 7 Wire #DW04914-1 which…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 3

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

If your Ford F-450 has an actual bed and is not a cab and chassis model (with a service bed or flatbed) then you can use the Curt universal folding gooseneck ball rail kit #C61502. You could then use Curt hitch #C-52 or #C65500. A custom hitch for a…

view full answer...

Answer 7

Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it you'd only need a ball like the part #C60618. If you…

view full answer...

Answer 8

If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…

view full answer...

Answer 9

The best way to prevent any clearance issues with your 2022 KZ Durango Gold G356RLQ and your 2020 Chevrolet Silverado 2500 with 6-1/2' bed and factory puck system is by using the Demco Autoslide 5th Wheel Hitch #DM79GV. This hitch slides back and…

view full answer...

Answer 10

Yes, we do! It is Curt Custom Underbed OEM-Style Gooseneck Hitch item #C60633. This gooseneck hitch is confirmed to fit both the 6-1/2' and 8' bed lengths of the new 2024 Ram 2500. It has a massive 35,000 lbs capacity and installs in…

view full answer...

Answer 11

The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57531 will fit your 2022 Ram 3500 Mega Cab with single rear wheels. This is the extra heavy duty 7,500 lb kit so it is most commonly used on dually trucks, but it will fit single rear wheel models…

view full answer...

Answer 12

I spoke to Dexter and they said there is a bit of a process for installing the spindle nut properly. 1. You will need to thread on the inner nut, rotate the hub, then tighten the nut to 100 foot pounds. 2. Loosen the nut to remove the torque, making…

view full answer...

Gooseneck Hitch Solution for 2008 Chevy Silverado 5500

Product Page this Question was Asked From

Continue Researching