Camper Tie Downs For 1997 Ford F-250 that Attach to Stake Pockets

Question

Question:

Im looking for camper tie downs for an 1997 f250 HD. The kind that slide down the square holes on the bed and the camper chain goes to it to hold the camper down. Thanks

asked by: Bryan N

0

Expert Reply:

We have stake pocket mounted camper tie downs for your 1997 Ford F-250 with the Brophy set part # TDSF and then for the turnbuckles you could use the # TDHP and you'd be set.

expert reply by: Jameson C

0

Answer 1

The best way to open up the rear stake pockets on your 2018 Ford F-150 would be to remove the rail cover, make a template out of cardboard using the stake pocket hole in the bed, then transfer that tempate to the rail cover and cut/trim accordingly.…

view full answer...

Answer 2

There are plenty of people who have installed the HappiJac Camper Tie-Downs #LC182910-182971 over a bed-liner so you shouldn't have an issue. The only problem you could run into is the thickness of the liner might force you to source longer…

view full answer...

Answer 3

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 4

For your 2005 Toyota Tundra I recommend the Brophy Stake Pocket Mounted Camper Tie Downs #TDSF. These particular tie-downs will mount right to the truck's stake pockets instead of having to clamp them around the bed rails like the other options…

view full answer...

Answer 5

You can determine which models of camper tie downs will work on your 2012 F-150 Super Crew Cab by using the link provided. At the top of the page is a drop-down menu where you can select your truck's exact configuration to then see compatible…

view full answer...

Answer 6

Gen-Y does offer a fifth wheel pin box to gooseneck coupler that can fit in place of the Lippert Turning Point pin box with the part #GY48GR. At this time they do not offer a pin box replacement (no gooseneck adapter) that can fit in place of the…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 9

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...