Lippert LCI35 Replacement Bearing Kit
Question:
Hello, I have a TT with dual Lippert LCI35 axles. Can you tell me what bearing kit and seals I would need, or do I need to pull the hubs apart and determine ID and OD?
asked by: Steven F
Helpful Expert Reply:
According to our conversations with Lippert your LCI35 axles use standard bearings and seals found on 3,500 lb axles so the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb with #84 Spindle # BK2-100 is what you are needing. If you want to pull your hub and check the parts that you currently have then you'll be looking for a # L68149 inner bearing, a # L44649 outer bearing, and a grease seal with an inner diameter of 1.719".
Attached is an installation video of this kit for you to check out.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: Replacement for Lippert 3,500 Lb LCI35-SB-85-68.5 Axle
- Shop: RV Interior Lighting
- Video: Review of Stromberg Carlson Wheel Chocks - Wheel Chock - Wheel Stabilizer - SC47MR
- Shop: Stromberg Carlson Chock Wheel Stabilizers for Tandem-Axle Trailers and RVs - Qty 2
- Video: Dexter Axle Trailer Suspension - Leaf Spring Suspension - K71-384-00 Review
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Article: How to Raise Your Travel Trailer Height
- Q&A: Do Trailer Drums have to be Turned when Replacing Electric Trailer Brake Assemblies
- Shop: RV Antenna and Radio
- Shop: RV Roof Membrane
- Q&A: Replacement Bearing Kit for a Lippert 3,500 lbs Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: leaf spring
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: leafsprings
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Shop: Suspension Enhancement
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Search Results: equalizer
- Article: Most Popular Wheel Bearings
- Search Results: lug nut
on Trailer Bearings Races Seals Caps
