Recommended Side Door Latch For An Older Haulmark Enclosed Trailer

Question

Question:

Looking for a side access door latch for an older haulmark enclosed trailer

asked by: Richie N

0

Expert Reply:

We have a few options available for side door latches and one that I like is the Polar Hardware Cam-Action Lockable Door Latch w/ 36" Pipe # 305736. The shorter pipe makes this ideal for side doors as it isn't quite as large and bulky as options for rear doors. This may not be an exact replacement for your Haulmark trailer, but it definitely a good option.

expert reply by: Lazer S

0

Answer 1

The great thing about the Cam-Action Lockable Door Latch Kit #PLR658-002 is that since it's a universal application you can definitely use shims for the cams so that everything is lined up correctly. When it comes to the strength of these, they…

view full answer...

Answer 2

According to the manufacturer the pipe is the 1 inch schedule 40 pipe which means the inner diameter is 1 inch and the outer diameter is 1-5/16" so the attached video and the video are correct. I have also attached a photo from the manufacturer…

view full answer...

Answer 3

Yes, we do have the grease seal you're after. It's the 10-10 Grease or Oil Double-Lip Seals part #RG06-090.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing #L68149 and an outer bearing #L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com…

view full answer...

Answer 7

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 8

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

view full answer...