Replacement Power Converters For a Progressive Dynamics PD4045K Power Center

Question

Question:

I have a PD4045K 45 amp converter, in my current rig. I have switched to Lithium Ion batteries 2. This hook up is not doing the job. Is there an option to just switch out the Converter, rather than the entire unit? Thanks

asked by: Frank

0

Expert Reply:

Yes, you can replace the Converter # PD4045CSV in your Progressive Dynamics Mighty Mini AC/DC Panel # PD4045KA.

expert reply by: Bud M

0

Answer 1

The Replacement Converter Section #PD4045CSV is actually a replacement for the Progressive Dynamics 4000 Series AC/DC Distribution Panel #PD4045KA. The 45 Amp Progressive Dynamics Replacement Section #PD4645V is for Parallax/Magnetek model 6345, WFCO…

view full answer...

Answer 2

The Replacement Converter Section for Progressive Dynamics 4000 Series RV Power Control Center part #PD4045CSV is a direct replacement for the converter section on the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger part…

view full answer...

Answer 3

The correct replacement control center for your Progressive Dynamics Panel #PD4045KA for the lithium battery style you mentioned is the part #PD4045LICSV. LiFePO4 is a type of lithium battery and has different charging requirements.

view full answer...

Answer 4

On the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA you need to verify that the converter/charger is set to the appropriate battery type that it is charging. It is common for the converter to get warm and the fan…

view full answer...

Answer 5

You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There isn't a center section replacement available for what you have that…

view full answer...

Answer 6

Yes, we confirmed with Progressive Dynamics that their Progressive Dynamics 4500 Series Inteli-Power Converter w/ Charge Wizard #PD4560K18LS8 that you referenced is compatible with AGM style batteries like what you have.

view full answer...

Answer 7

You will be able to upgrade your #PD4045KA to use lithium batteries, and in order to do this you'll need to replace the converter (there isn't just an added part aside from the converter that will allow you to do this). So what you need for…

view full answer...

Answer 8

I reached out to Progressive Dynamics and found that the PD4045LICSV is only capable of charging lithium batteries. In order to be able to charge both lead acid and lithium, you will need the Replacement Converter Section for Progressive Dynamics…

view full answer...

Answer 9

I spoke with Progressive Dynamics and they informed me that you cannot replace just the converter section of your 8735P and you would need a new panel, the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger part #PD4045KA to be…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Thanks for the picture! The Replacement Converter Section item #PD4045CSV is the correct part you need to replace your PD4045KA converter. It is compatible with Lithium batteries you'll just have to flip the LI/LA switch. I linked the…

view full answer...