Can Internal Parts Be Replaced for 45 Amp Progressive Dynamics Replacement Section

Question

Question:

Hello, Is PD4045CSV just the converter section inside of this: PD4645V

asked by: Doug K

0

Expert Reply:

The Replacement Converter Section # PD4045CSV is actually a replacement for the Progressive Dynamics 4000 Series AC/DC Distribution Panel # PD4045KA.

The 45 Amp Progressive Dynamics Replacement Section # PD4645V is for Parallax/Magnetek model 6345, WFCO model 8945, and Parallax models 7345 and 8345 power centers. So if this section is messing up internally you'll need to replace the entire thing.

expert reply by: Jon G

0

Answer 1

Yes, you can replace the Converter #PD4045CSV in your Progressive Dynamics Mighty Mini AC/DC Panel #PD4045KA.

view full answer...

Answer 2

Thanks for the picture! The Replacement Converter Section item #PD4045CSV is the correct part you need to replace your PD4045KA converter. It is compatible with Lithium batteries you'll just have to flip the LI/LA switch. I linked the…

view full answer...

Answer 3

You will be able to upgrade your #PD4045KA to use lithium batteries, and in order to do this you'll need to replace the converter (there isn't just an added part aside from the converter that will allow you to do this). So what you need for…

view full answer...

Answer 4

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 5

I have a solution for you but there isn't just a replacement converter section for the Elixir ELX-45. You're going to need to replace the entire panel with the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger item…

view full answer...

Answer 6

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 7

Based on your picture you actually have the PD7345 which for a replacement converter section you would want the part #PD4045CSV which is compatible with lead acid and lithium batteries.

view full answer...

Answer 8

WF-8735P is a 35-amp panel model. To upgrade to a lithium ready system you will need the Progressive Dynamics #PD4135K Converter/Smart Charger rated for 35-Amp. this system includes a high voltage output to provide full, quick charge for your lithium…

view full answer...

Answer 9

Great question Larry, so the current version of the Progressive Dynamics converter #PD4655V does support lithium batteries as-is. At one point it did not but since lithium batteries have become more popular Progressive Dynamics decided to make this…

view full answer...

Answer 10

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

We have a great option in a replacement 45 amp power converter for your ELX-45. I suggest the Progressive Dynamics, #PD4045KA. This is a 2-in-1 AC/DC distribution panel and smart charger that works with lithium-ion, flooded lead acid, AGM, and gel…

view full answer...