Does EcoHitch Front Mount Hitch Require Transmission Fluid Exchange Relocation on 2022 F-250 Diesel

Question

Question:

What is required.to install on a 2022 diesel? It sounds like you have to relocate an intercooler

asked by: Nathan R

0

Expert Reply:

The EcoHitch Hidden Front Mount Trailer Hitch Receiver # 306-X7904 will require you to use the supplied relocation brackets and move the transmission fluid exchanger. You will open the transmission oil line retainer clip, mount the relocation brackets to lower the exchanger, then re-mount the exchanger and re-position the transmission lines in the retainer clip and close it. See the instructions below.

Installation of this hitch will also require the temporary removal of the bumper, as well as trimming of the plastic bumper insert. It is also worth noting that this hitch will not fit with the larger front mounted auxiliary cooler mounted in front of the radiator.

I have attached an installation video for your reference.

expert reply by: Robin H

0

EcoHitch Front Hitch Diesel Installation.
(click to enlarge)

Answer 1

The EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #306-X7904 is a fit with your truck and its components because the hitch does not reach past your sensors. The accessory you use in the hitch will likely cause issues…

view full answer...

Answer 2

You are definitely on the right track as far as parts needed to flat tow your 2017 Ford F-350. For a tow bar I recommend the Roadmaster Nighthawk All Terrain #RM-676 because it has integrated safety cables and coiled wiring umbilical, non-binding…

view full answer...

Answer 3

We have just what you need, the Access Toolbox Edition Soft, Roll-Up Tonneau Cover, #A61409 combined with the UWS Truck Bed Toolbox w/ Pull Handles, #UWS07647. The Access Toolbox Edition Soft, Roll-Up Tonneau Cover, #A61409 is designed to fit behind…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Yes, it will so long as your 2023 Ford F-350 doesn't have dual rear wheels. It won't work with the dually models since there is a larger front mounted auxiliary cooler that interferes with installation. The EcoHitch Hidden Front Hitch item…

view full answer...

Answer 11

The Curt #31604 fits all models of the 1999 Dodge Ram 2500 with the exception of the Sport. As long as your truck is not the Sport model you will be able to install this on the front.

view full answer...

Answer 12

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Does EcoHitch Front Mount Hitch Require Transmission Fluid Exchange Relocation on 2022 F-250 Diesel

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching