Replacement Parts For Thule T2 Classic

Question

Question:

hello I need to change the screw and the gray piece on my t2 pro rack see photo but impossible to find! This is a screw who started at acutight knob at Hitch for jam the rack ! Help me

asked by: Christian

0

Expert Reply:

Unfortunately, those parts are not something we carry for your Thule T2 Bike Rack # TH9044-TH9046. The replacement parts we carry are:

Replacement End Cap for T2 Bike Carriers # 853-7017.

Replacement Hex Bolt for Thule T2 Classic Platform Bike Racks # 8537012.

Replacement 1/2"-13 Lock Nut for Thule Roadway Bike Carriers # 853-5584-02.

Replacement M12 Lock Washer for Thule Hitch Mounted Products # 956122159.

Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2.

Thule One-Key System Lock Cylinders # TH450200 for 2 or Thule One-Key System Lock Cylinders # TH450400 for 4.

I checked with Thule and the only screw I was able to find is # 853-5972 with the matching nut # 853-5973.

expert reply by: Bryce D

0

Answer 1

The parts that you need for your Thule T2 Classic TH9044 are the following parts: - Replacement Top Spar Hanger for Thule T2 Classic Bike Platform Rack #853595202 - Replacement Bottom Spar Hanger for Thule T2 Classic Bike Platform Rack #753358402

view full answer...

Answer 2

The hardware needed to install the Thule Replacement Backbone to the Thule T2 Platform Bike Carrier, part #TH916XTR, is (2) of the #956122159 lock washer, (2) of the #908-1240-54 bolt, and (2) of the #951-1224-54 flat washer. If you need the end cap…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 7

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Replacement Parts For Thule T2 Classic

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching