Hardware Needed to Install Thule Replacement Backbone to Thule Bike Rack # TH916XTR

Question

Question:

What is the bolt set bolt and washers required to attach the backbone to a Thule 916XTR?

asked by: Hung

0

Expert Reply:

The hardware needed to install the Thule Replacement Backbone to the Thule T2 Platform Bike Carrier, part # TH916XTR, is (2) of the # 956122159 lock washer, (2) of the # 908-1240-54 bolt, and (2) of the # 951-1224-54 flat washer. If you need the end cap to fit in the end of the Backbone it is # 853-7017.

If you are also needing the parts to install the 2 bike trays to the Backbone you will need (2) of the Top Spar Hangar # 853595202 and (2) of the Bottom Spar Hangar # 753-3584, along with (8) of the # 853-5976 M8 bolt, and (8) of the # 951081654 flat washer.

expert reply by: Jeff D

0

Answer 1

The parts that you need for your Thule T2 Classic TH9044 are the following parts: - Replacement Top Spar Hanger for Thule T2 Classic Bike Platform Rack #853595202 - Replacement Bottom Spar Hanger for Thule T2 Classic Bike Platform Rack #753358402

view full answer...

Answer 2

Yes, the Replacement Bottom Spar Hanger for Thule T2 Classic Bike Platform Rack #753358402 and the Replacement Top Spar Hanger for Thule T2 Classic Bike Platform Rack #853595202 will work for your Thule T2 Platform Bike Carrier #TH916XTR…

view full answer...

Answer 3

We do offer the Thule Replacement M8 x 1.25 x 25 mm Bolt that you'll use along with their Replacement Spar Hangar Bottom #753-3584. You can use part #853-5976 which is sold individually.

view full answer...

Answer 4

We do have replacement hardware for the Thule T2 Classic 2 Bike Rack TH9044. The specific bolt that holds the tire tray in place is the Replacement Slotted Cutting Bolt for Thule T2 Classic Bike Platform Rack #TH34FR. This bike rack uses 2 of these…

view full answer...

Answer 5

Based on the picture you submitted and the description of what is wrong with your rack it looks like you referenced all of the parts you would need to replace on your Thule T2 Bike Rack part #TH9045. Replacement Spar and Pivot Tube is no longer…

view full answer...

Answer 6

Unfortunately, those parts are not something we carry for your Thule T2 Bike Rack #TH9044-TH9046. The replacement parts we carry are: Replacement End Cap for T2 Bike Carriers #853-7017. Replacement Hex Bolt for Thule T2 Classic Platform Bike Racks…

view full answer...

Answer 7

Yes, we do have the part you are looking for - the matching top and bottom spar hangers. The parts are as follows: - Replacement Bottom Spar Hanger for Thule T2 Classic Bike Platform Rack #753358402 - Replacement Top Spar Hanger for Thule T2 Classic…

view full answer...

Answer 8

You can use the Replacement Locking Ratchet Arm Assembly for T2 Bike Carriers #752-1272-001, which will fit on Thule T2 Classic bike racks (part number 916XTR) and will allow you to have a better fit on fat tire bikes with 29" tires. I've…

view full answer...

Answer 9

Replacement Locking Ratchet Arm Assembly #753-3579 is the same one that originally came on your T2 bike rack so it would not offer any additional length. There is a longer one, #752-1272-001, which is 31-1/2 inches long overall which is about 2…

view full answer...

Answer 10

We do carry the part #753-3584 that you referenced which is a replacement spar hangar bottom for an older version of the Thule T2 bike rack.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...