Can Spacers of Firestone Ride Rite Kit F2582 be Used with 4WD and 2 inch Leveling Kit

Question

Question:

The instructions say only use the spacer on a 2wd application. But what if your 4wd model has a 2 inch leveling kit on the front end? Can the spacer be used to help raise the rear?

asked by: Bozobanks

0

Expert Reply:

Yes, you could use the spacers with the 4WD models of the Firestone kit part # F2582 since you have a 2 inch leveling kit.

expert reply by: Jameson C

0

Answer 1

Yes I recommend following the the Firestone installation video. Generally there is not a need for it on a standard 4x4 truck but in your case I think taking their advise from the video is your best bet when installing the Firestone Ride-Rite Air…

view full answer...

Answer 2

The problem that you are experiencing is a common issue with 1/2 ton trucks like your 2011 Ford F-150. The rear suspension on 1/2 ton trucks will still allow some sag even when using weight distribution. While making some adjustments to the set up…

view full answer...

Answer 3

A weight distribution with sway control is generally our first recommendation before air bags. Air bags will help keep the ride level but a weight distribution system will actively reduce sway, help level the ride, and most importantly reduce the…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

From our experiences the Harbor Freight trailers like yours have a hub bore that requires a cap or Bearing Buddy that measures 2.047 inches like the #BB2047 you referenced. We don't have a standard cap that fits this size so the Bearing Buddy is…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 12

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Can Spacers of Firestone Ride Rite Kit F2582 be Used with 4WD and 2 inch Leveling Kit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching