Correct Fastway e2 Weight Distribution System for a Forest River Wolf Pup 17JG

Question

Question:

What is the correct size Fastway E2 for a Wolf Pup 17JG?

asked by: Don C

0

Expert Reply:

The correct Fastway e2 Weight Distribution System for a Forest River Wolf Pup 17JG is part # FA92-00-0800. That said, you will still need a hitch ball, part # EQ91-00-6080 for 2" or part # EQ91-00-6100 for 2-5/16".

expert reply by: Conner L

0

Answer 1

I checked the online owners manual for your 2013 Toyota 4Runner and the tongue weight can be between 9 and 11 percent of the trailer weight without using a weight distribution system. So based on the tongue weight you gave of 417 lbs, the tongue…

view full answer...

Answer 2

The Reese Strait-Line Weight Distribution System w Sway Control - item #RP66086 is a great product and would work well with your 2021 Wolf Pup 16FQ camper but it is slightly over-rated for what you need. Your camper maxes out below 4,000 lbs and the…

view full answer...

Answer 3

I would definitely recommend Equal-i-zer for a weight distribution hitch. Unlike other companies with tons of products, Equal-i-zer only focuses on weight distribution and is considered to be the best overall system. Choosing the right hitch will…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Correct Fastway e2 Weight Distribution System for a Forest River Wolf Pup 17JG

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching