Will Hitch From 2016 Nissan Versa Fit 2021 Versa

Question

Question:

Will the Curt # C11256 fit a 2021 Nissan Versa? I have the hitch from my 2016 Versa that I'd like to use on my new Versa?

asked by: Sandy

0

Expert Reply:

Your Curt # C11256 will fit 2012-2019 Nissan Versa models, but unfortunately it won't fit your new 2021 model.
Unfortunately, we do not carry a hitch for your 2021 model.

Instead, you could use a trunk bike rack line the Saris Bones EX 2 # SAR83FR or the Yakima Fullback # Y02633.

You could also add a roof rack and carry cargo or bikes on your roof.

expert reply by: Mike L

0

Answer 1

For your 2019 Nissan Versa Note SV the correct Curt hitch for it is the part #C11378. If you were looking for a bike rack too the Hollywood Racks Trail Rider part #HR200Z is a really great option that's very stable, easy to load, and priced…

view full answer...

Answer 2

Since the you will be installing a Class I, 1-1/4 inch trailer hitch receiver on your 2014-2016 Nissan Versa Note, you are correct that you will need an adapter. You can safely use an adapter, but you will need to know that there will be some extra…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver #C67FR does not require any type of fascia trimming whatsoever to install on your 2020 Kia Soul.

view full answer...

Answer 4

Draw-tite offers a 2" hitch for your 2020 Kia Sou, it is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" #DT25GR. The 2" is a great choice since you will be able to choose from a wide variety of accessories.

view full answer...

Answer 5

For your 2022 Kia Soul as long as you do NOT have the 1.6L engine you'll need the Curt #C67FR. If you do have the 1.6l engine then unfortunately there is not a hitch option for you. This is a class I hitch with a 200lb tongue weight rating, and…

view full answer...

Answer 6

We have two hitches that will fit both. The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" #DT25GR will fit the 2020 - 2024 Kia Soul excluding 1.6L Turbo. And the Curt 1-1/4" receiver #C67FR is confirmed to fit the same years.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Will Hitch From 2016 Nissan Versa Fit 2021 Versa

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching