Recommended Trailer Hitch Receiver And 7-Way Wiring Harness For A 2022 Toyota Sienna
Question:
I need a trailer hitch and 7-way connector to tow a trailer with my 2022 Toyota Sienna. Can you please recommend both along with any other parts needed to install? Thanks
asked by: Curtis
Expert Reply:
For you 2022 Toyota Sienna I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C22UR. This fully welded trailer hitch receiver bolts onto your Toyota Sienna's frame with no welding required. The gloss black powder coat finish over protective base coat offers superior rust resistance.
For trailer wiring you'll need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK69FR along with the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7 to install a 7-way socket on the rear of your Sienna. The # TK69FR T-One connector plugs into your vehicle's wiring harness, which is located in the rear cargo area. You will have to remove the plastic threshold cover, side panels, cargo trays, and interior trim panels to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
The # ETBC7 kit includes everything you need to install an electric trailer brake controller and 7-way connector using the existing 4-way flat on your vehicle.
For a great starter ball mount kit I recommend the etrailer Ball Mount Kit for 2" Hitches - 7,500lbs # 989900. It has a 1-7/8" hitch and 2" hitch ball to allow you to tow multiple trailers. It has a 1" or 3" rise and a 2" or 4" drop to keep your trailer level while towing.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 2024 Toyota Sienna EcoHitch Hidden Trailer Hitch Receiver Fitment
- Q&A: Hidden Hitch Recommendation for 2024 Toyota Sienna XLE
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Will The Trailer Hitch DT73QR Obstruct The Lift Gate Sensor On A 2023 Lexus RX 350?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: Does the Curt Hitch Work On a 2021 Toyota Sienna with Hands Free Liftgate Feature
- Q&A: Swagman Bike Rack that Can be Used at Rear of Motorhome
- Q&A: Comparing Curt and etrailer Hitch for 2023 Toyota Sienna
- Q&A: Is Trimming Required to Install the etrailer Hitch # e56RR?
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Article: Rooftop Cargo Carriers