Is there a 1-7/8 Inch Trailer Hitch Ball with a 1-1/4 Inch Shank

Question

Question:

I am looking for a 1 -7/8 hitch ball with a 1 1/14 diameter shank. Does this part # C48810 that is a pintle ball also work with a standard coupler? or do you have one of this size that is standard that I am missing?

asked by: Christian D

0

Expert Reply:

Ball # C48810 is the only 1-7/8 inch diameter ball that also has a 1-1/4 inch shank. Like you said it is made to fit a pintle hitch combo ball mount. What I recommend is a ball with a 1 inch diameter shank like # 19260 and then use bushing # 58184 or # F-2 to use it in your ball mount with the 1-1/4 inch opening.

expert reply by: Michael H

0

Answer 1

You might be able to tow a small 5x8 utility trailer using a hitch ball mounted to the bumper of your truck but this will depend on how heavy the loaded trailer is along with the specific bumper capacity of your vehicle. If you can tell me the year,…

view full answer...

Answer 2

You mentioned a 1 inch shank size for a ball mount, and the industry standard sizes are 1-1/4 inch, 2 inch, or 2-1/2 inch. The 1-1/4 inch ball mounts come in a variety of rise and drop options to allow you to safely tow a trailer level. I've…

view full answer...

Answer 3

I was able to find some pictures to give you a pretty good idea of what the EcoHitch Hidden Trailer Hitch Receiver #306-X7311 looks like after installation and with a bike rack as well. I reached out to EcoHitch see if I could provide you with the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 11

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Is there a 1-7/8 Inch Trailer Hitch Ball with a 1-1/4 Inch Shank

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching