Parts Needed to Adapt an Older Yakima Ski Rack to Yakima JetStream Cross Bars

Question

Question:

I have an older yakima ski rack that I want to attach to my yakima jet stream bars. Something like the mighty mount 39H but with a vertical attachment that goes into the ski rack. Does this part exist?

asked by: Eric C

0

Expert Reply:

What you need is the Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590. These mounts will fit ski racks made as early as 1990 and are the most likely option for adapting your older Yakima ski rack to your JetStream cross bars.

expert reply by: Scott S

0

Answer 1

Your picture didn't make it through but we do know that the Buttondown uses the MightyMounts part #Y03590 to attach to factory or aero shaped crossbars.

view full answer...

Answer 2

Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 would replace the Yakima SnapAround Mounting Brackets part #Y8810135 so that you can use your Yakima bike rack with the Rhino-Rack Vortex Aero Crossbars like part…

view full answer...

Answer 3

Your picture didn't make it through but the replacement hardware for the Thule Snow Pack #7521241001 that you referenced was designed to adapt the older Snow Pack carriers to fit the aero style bars like what you have so this would work for you.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Since your 2023 Subaru Crosstrek does not have raised rails you are going to need a whole new roof rack since the Thule Rapid 450R Feet #753-3399-02 are only going to fit vehicles with raised rails. I recommend sticking with the Thule roof rack…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, the etrailer hitch part #e98912 that you referenced fits the Wilderness versions of the 2024 Subaru Crosstrek

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The antenna on your 2023 Subaru Crosstrek sits low enough that clearance for the Inno Shadow 16 Rooftop Cargo Box #INBRA1210BK won't be an issue! If you don't already have a roof rack just let me know if your Crosstrek has a bare roof or the…

view full answer...

Answer 10

The Thule Hullavator #TH898 will require crossbars that overhang the towers by 4' - 8". There is not any kind of adapter that is made for this purpose. Your best bet will be to replace the factory crossbars with aftermarket crossbars that…

view full answer...

Answer 11

In looking at the 2023 Subaru Crosstrek it is unchanged from the previous 2022 model year that the Curt Trailer Hitch Receiver #C13382 fits. I recommend installing the T-One Vehicle Wiring Harness #118467 so you will be able to add Auxiliary Lights…

view full answer...

Answer 12

To get both of the 2021 Subaru Outbacks pulling the Safari Condo F1743, you would need to purchase two of the #ETBC7 kits. They would piggy back off of the existing 4 pin connections already on the vehicles, so you are already partially there. I did…

view full answer...