Bike Rack that Could Attach to Shank of Ball Mount

Question

Question:

will this fit over my blueox towbar so i can place bike rake between motorhome and towed vehicle?

asked by: Steven

0

Expert Reply:

The part you referenced is just a replacement part from a bike rack but we do have the Curt Clamp-On 3 Bike Rack for 2" Ball Mounts # C18013 which you could attach to the shank of your tow bar to allow you to carry up to 3 bikes.

expert reply by: Jameson C

0

Answer 1

You are correct , the drawbar, also called a ball mount, is the bar with the hitch ball on one end and the other end fits into the hitch receiver. On the Curt Clamp-On 3 Bike Rack, part #C18013, the base does measure 1-1/2 inches, so you will need…

view full answer...

Answer 2

My technical contact at Heininger told me that they have not had any complaints of the Advantage SportsRack V #HE1011 interfering with anyones turn radius to date. Just to give you a full idea of how adding the Advantage SportsRack will effect your…

view full answer...

Answer 3

Curt Clamp-On 3 Bike Rack for 2" Ball Mounts - Towing Item #C18013 can be used on a weight distribution shank as long as there is enough free space between the face of the hitch receiver and any support gusset or other part of an assembly on…

view full answer...

Answer 4

As-is, there is minimal theft deterrent with the Curt Clamp-On 3 Bike Rack #C18013; Other than inconvenience. The rack can be a little cumbersome to break down as there are a couple steps needed and those steps are made more difficult with bikes…

view full answer...

Answer 5

I may have another option for you, but the original Thule 460 podium feet have been discontinued and we do not have any old stock left. Instead I recommend changing your crossbars and using the newer Thule Rapid Podium Feet #TH460R. Since you are…

view full answer...

Answer 6

The Replacement FootBase for Thule Tracker #753-2149 is what you currently have on the Thule tracks on your Leer shell. This footbase is for the now discontinued Thule Tracker square bar setup. You may be able to piece this system together even…

view full answer...

Answer 7

It sounds like you may be looking for the Thule Fit kit for Podium Feet in channels part #THKIT3101. The fit kit includes pads, bolts, plates and channel nuts for adapting the Podium legs for use with tracks.

view full answer...

Answer 8

Yes, the Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 #TH460R will allow you to attach aero-style Thule crossbars on top of your Leer topper with Thule tracks. The Rapid Podium Feet will fit right into the tracks. If you need a…

view full answer...

Answer 9

To construct a roof rack compatible with the Thule Track system on your camper shell, you'd need the following parts: Thule Rapid Podium Foot Pack, part #TH460R Thule Fit Kit for roof rails, part #THKIT3101 Then you need to choose the length of…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...