What is Best Trailer Wiring Harness for 2022 Hyundai Palisade

Question

Question:

Which trailer wiring harness should I get for my 2022 Hyundai Palisade?

asked by: Rodney

0

Expert Reply:

For your 2022 Hyundai Palisade the best trailer wiring option is the Curt T-Connector which has the most reliable converter box and a very easy install. I attached an install video for this kit on a similar 20' Palisade for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The Curt T-Connector Vehicle Wiring Harness #CU94FR will work just fine with your 2022 Hyundai Palisade! Curt is really good about calling out differences in fits like that and this harness has fit the last couple of model years of the Palisade…

view full answer...

Answer 2

For your 2020 Hyundai Santa Fe that's equipped with the factory tow package, the trailer wiring harness is the Curt T-Connector #CU94FR. This custom harness is going to plug right into that factory tow port beneath the vehicle, on the…

view full answer...

Answer 3

You actually do not have to push any of the wiring of the Curt trailer wiring harness #CU94FR through the interior of the vehicle. If you watch the install video I attached you can see that it stays outside of the vehicle.

view full answer...

Answer 4

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Answer 5

For your 2022 Hyundai Palisade I recommend going with the Curt T-Connector Vehicle Wiring Harness #CU94FR due to it being a plug and play option that will not require any splicing. If you do not already have a trailer hitch receiver installed on your…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, we do have a hitch receiver for your 2022 Hyundai Palisade that will allow you to tow your jet ski. It is the Curt Trailer Hitch Receiver item #C13427. This is a custom fit hitch that bolts directly to your Palisade's frame with included…

view full answer...

Answer 9

For your 2020 Hyundai Palisade we have a couple of wiring options. These will both offer a 4 way flat trailer connector. They are almost identical, they install the same, have the same power output and are designed to protect your vehicle should…

view full answer...

Answer 10

We do have a wiring harness to fit your 2019 Hyundai Santa Fe. The correct part is #CU94FR. Since you have the tow package there's a connector under the rear bumper on the driver's side. The harness plugs in here and then you need to find a…

view full answer...

Answer 11

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 12

I know exactly what you need and for the 2022 Hyundai Palisade, Curt has a wiring harness that does not require you to run a wire up to your battery. It is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item #CU94FR.…

view full answer...