Trailer Hitch Recommended for Light Duty Towing and Carrying Bike Rack with 2022 Toyota Sienna

Question

Question:

Which hitch is recommended for 2022 Toyota Sienna? Need hitch for 2 inch bike rack, but I might also tow a small pop-up camper at some time in the future.

asked by: Belinda

0

Expert Reply:

Curt and Draw-Tite both offer hitch fits for the 2022 Toyota Sienna.

The Draw-Tite # DT55MR has a higher capacity than the Curt # C22UR , but since the towing capacity of the Sienna is limited to 3500 lbs, the higher capacity isn't necessary and couldn't be used anyway.

I'd recommend the Curt # C22UR due to the fact that the hitch is manufactured in the US.

Because at some point you might be towing with the hitch, you'll also need a trailer wiring harness like part # TK69FR, a ball mount like # D-28 and a hitch pin like # PC3 and # 19261 for a 1-7/8 or # 63845 for a 2 inch trailer ball.

expert reply by: Mike L

0

Answer 1

You will have a few choices for a hitch receiver for your 2022 Toytoa Sienna Hybrid. My recommendation is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2". part #DT55MR. It is a Class III hitch receiver, meaning…

view full answer...

Answer 2

The EcoHitch Hidden Trailer Hitch Receiver you are talking about for the 2021-2022 Toyota Sienna is the x7422s. This hitch is not rated for a weight distribution system. For a hitch that can be used with weight distribution I recommend the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

We do offer a trailer hitch receiver that I confirmed with the manufacturer is a direct fit for your 2021 Toyota Sienna, which is from Curt: - Curt Trailer Hitch Receiver #C22UR This is an easy bolt-on installation and will give your 2021 Sienna a…

view full answer...

Trailer Hitch Recommended for Light Duty Towing and Carrying Bike Rack with 2022 Toyota Sienna

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching