What Trailer Hitch do You Recommend for My 2022 Hyundai Santa Cruz?

Question

Question:

Yes, we do carry that hitch on our site! That is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C23WR. This Curt hitch is confirmed to fit your 2022 Hyundai Santa Cruz and comes with all hardware required for a bolt-on installation.

asked by: Richard C

0

Expert Reply:

Yes, we do carry that hitch on our site! That is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C23WR. This Curt hitch is confirmed to fit your 2022 Hyundai Santa Cruz and comes with all hardware required for a bolt-on installation.

expert reply by: Bob C

0

Richard S.

1/1/0001

Yes, we do carry that hitch on our site! That is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C23WR. This Curt hitch is confirmed to fit your 2022 Hyundai Santa Cruz and comes with all hardware required for a bolt-on installation.

Reply

Bob C.

11/29/2021

Absolutely! If you are looking for a 4-way wiring harness, for your 2022 Hyundai Santa Cruz, I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 (without factory tow package) or the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # CU94FR (with factory tow package). With these wiring harnesses, you will have brake light, turn signal, and running light functionality.

Reply

Answer 1

So weight distribution systems put additional stress on the chassis and hitch of the vehicle. Typically the hitches that are rated for WD are for vehicles that have full frames and/or the hitch installs with longer flange mounting brackets to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 10

To install a Curt TriFlex NEXT Trailer Brake Controller #C24VV on your 2024 Hyundai Santa Cruz you will need the Curt Custom Wiring Adapter #C77BR. This will provide you with a plug and play connection as long as you have the factory 7-Way #C68JR.

view full answer...

Answer 11

If you're wanting to add a 4-way to power your trailer's signal lights then you need the Curt #CU94FR. If you want to add a 7-way to your 2024 Santa Cruz then you can use the Curt #C68JR. Both of these plug into the tow package you referenced…

view full answer...

Answer 12

So first of you are going to need the Curt Trailer Hitch Receiver #C23WR which I see you already found. And I do understand your confusion with wiring since you would think since it did not come with the receiver you would not have the factory tow…

view full answer...