Ball Mount with 7-1/2 Inch Drop For 2 Inch Receiver
Question:
Im looking for a 7 or 7.5 inch ball drop. 8 is too much. I see Curt mounts 45100 listed as 7.5 but the part number and picture list it as 8. Do you have any true 7 or 7.5 inch drop ball mounts? Regards
asked by: Douglas F
Expert Reply:
For reasons unknown, Curt actually rounds up to the nearest number for advertising their ball mount, which is confusing, but the true drop is 7-1/2 inches for the Curt Ball Mount for 2" Hitches # C45100. So this ball mount will work to get the drop you are looking for; along with the ball mount you will need a pin and clip or lock as well as a hitch ball. The complete list of parts is the following:
- Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop # C45100
- 1-7/8" Hitch Ball # C40002 or 2" Hitch Ball # 40038
- Pin and Clip for 2" and 2-1/2" Hitches # C21500 or Trailer Hitch Receiver Lock for 2" Hitches # e98880
Products Referenced in This Question
2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 12000 lbs GTW
- Class III
- CURT
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 3500 lbs GTW
- Class III
- CURT
more information >
Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 7 Inch
- Rise - 6 Inch
- Fits 2 Inch Hitch
- 5000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 3-3/16 Inch Span
- CURT
more information >
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Article: Rust Prevention
- Article: Best Bike Racks for Electric Bikes
- Article: How to Carry Bikes While Towing a Travel Trailer
- Shop: Side Window Vents
- Shop: Vehicle Tow Bar Brake System
- Shop: Cold Air Intake
- Search Results: curt
- Search Results: 80412
- Search Results: curt ball mount only
- Search Results: locking hitch pins
- Search Results: ball mount
- Search Results: ball mount only
- Video: Draw-Tite Hitch Anti-Rattle - Standard Anti-Rattle - 63080 Review
- Video: Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review
- Video: Draw-Tite Ball Mounts - Fixed Ball Mount - 2793 Review
- Video: Roadmaster 12 Volt Outlet Kit Installation - 2016 Chevrolet Equinox
- Video: Review of etrailer Hitch Locks - Standard Hitch Pin - E98881
- Shop: Trailer Hitch
- Video: Curt Hitch Cargo Carrier Test Course
- Video: etrailer.com Flush Design Trailer Hitch Receiver Lock Review
- Shop: Draw-Tite Ball Mount for 2" Hitch - 7" Rise, 8" Drop - 9-1/2" Long - 12,000 lbs
- Shop: Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
- Shop: Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Shop: etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span - Chrome
- Shop: Adjustable Ball Mount for 2" Hitches - 9" Rise to 10-1/4" Drop - 5,000 lbs
- Shop: Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount - 7" Rise to 9-1/2" Drop - 5,000 lbs
- Shop: Curt Ball Mount for 2" Hitches - 7" Rise, 8" Drop - 9-3/8" Long - 12,000 lbs
- Q&A: Span and Capacity of Locks Included with Blue Ox Towing Accessories Kit for Avail Tow Bars
- Q&A: Ways to Carry a Bike Rack While Towing a Trailer