Recommendations For Setting Up A 2022 Subaru Outback Wagon To Tow A Trailer

Question

Question:

I'm looking to set up my new 2022 Subaru Outback Wagon to tow a small trailer. It doesn't have brakes or anything, but my Outback doesn't have anything either. Was looking at your C67JR hitch, but what else do I need? Suggestions and recommendations are welcome. Thanks

asked by: Bryant

0

Expert Reply:

To get your 2022 Subaru Outback Wagon ready to tow a trailer, you will need to start with a hitch. The Curt Class III # C67JR is definitely a great place to start. This American made hitch will be one of the most, if not the most, hidden options we currently have available, so it will have a nice clean look once installed. The install is a bit labor intensive, but not overly so and I did include an install video to help. This will also measure 15-1/2" from the ground to the inside top of the receiver, giving you good ground clearance.

The 15-1/2" measurement will also play into how much rise or drop you will need for a ball mount. On average, from the ground to the bottom of a coupler on a small trailer will be around 17" to 18", though I do suggest measuring to make sure. If you do get 17" or 18", I highly recommend the Curt Fusion Ball Mount # C45155. This has 2-1/4" of rise, putting you exactly where you need to be, and has a 2" ball welded on already, so no tightening needed. It also includes a pin and clip, so it's a one stop shop kind of part. Which I like.

The only other thing you will need is wiring. The Outback Wagon was kind of expected to tow, so installing the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat # 118467 is a snap. Literally. All you need to do is pop a small panel off, snap this into place, and pop the panel back on. I included an install video showing just how easy this is as well. Once that's in, you are good to go.

expert reply by: Lazer S

0

Answer 1

There are differences. The differences lie in the fitment and capacities of each hitch. The Curt 13494 which we sell as part #C67JR fits the 2020-2022 Subaru Outback and 2020-2021 Subaru Legacy models of the same model years. The hitch has a 3500 lb…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is a great option for your 2020 Subaru Outback. The hitch installs between the frame and the bumper using the same hardware from the manufacturer, so it won't impact the…

view full answer...

Answer 3

We have confirmed with Draw Tite that their hitch part #DT73RR is a confirmed fit for the 2021 Subaru Outback so it will work great on your vehicle. If you wanted a similar hitch that is a little more hidden the Draw Tite part #DT94YR would be a…

view full answer...

Answer 4

If ground clearance is the primary concern then the best option for a 2020 Subaru Outback (All Models) is the Curt Trailer Hitch Receiver part #C67JR because the receiver tube will be tucked up under the rear bumper therefore provides the best ground…

view full answer...

Answer 5

The EcoHitch trailer hitch, part #306-X7601, does sit underneath the rear bumper so it reduces the ground clearance at the bumper for sure. It installs right up to the fascia on a Subaru Outback Wagon so if you measure from the underside on one down…

view full answer...

Answer 6

We haven't had any ground clearance issues with any of the trailer hitches we offer for your 2018 Subaru Impreza including the Draw Tite part #36644 that you mentioned. When we installed the 2 inch hitch part #76209 on a 2018 Impreza like yours…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Recommendations For Setting Up A 2022 Subaru Outback Wagon To Tow A Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching