Draw Tite Trailer Hitch that Fits 2021 Subaru Outback Onyx XT

Question

Question:

I cant find info on the Draw Tite hitch for the 2021 Outback. My sales person said there is no difference between the 2020 and 2021. Do you know if Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 Item # DT73RR will fit the 2021 Outback Onyx XT? Thanks

asked by: Dale

0

Expert Reply:

We have confirmed with Draw Tite that their hitch part # DT73RR is a confirmed fit for the 2021 Subaru Outback so it will work great on your vehicle. If you wanted a similar hitch that is a little more hidden the Draw Tite part # DT94YR would be a really great option as only the hitch opening hangs below the rear bumper.

If you were looking for a really solid bike rack the Hollywood Racks part # HR200Z is the best option for that as it's easy to load/use, is priced decently and is very stable.

expert reply by: Jameson C

0

Answer 1

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 2

The EcoHitch trailer hitch, part #306-X7601, does sit underneath the rear bumper so it reduces the ground clearance at the bumper for sure. It installs right up to the fascia on a Subaru Outback Wagon so if you measure from the underside on one down…

view full answer...

Answer 3

We haven't had any ground clearance issues with any of the trailer hitches we offer for your 2018 Subaru Impreza including the Draw Tite part #36644 that you mentioned. When we installed the 2 inch hitch part #76209 on a 2018 Impreza like yours…

view full answer...

Answer 4

To get your 2022 Subaru Outback Wagon ready to tow a trailer, you will need to start with a hitch. The Curt Class III #C67JR is definitely a great place to start. This American made hitch will be one of the most, if not the most, hidden options we…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR is a great option for your 2020 Subaru Outback. The hitch installs between the frame and the bumper using the same hardware from the manufacturer, so it won't impact the…

view full answer...

Answer 6

If ground clearance is the primary concern then the best option for a 2020 Subaru Outback (All Models) is the Curt Trailer Hitch Receiver part #C67JR because the receiver tube will be tucked up under the rear bumper therefore provides the best ground…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...