Which Fifth Wheel Rail Kit Fits your 2021 Ford F-150 6-1/2 ft Bed

Question

Question:

Ive seen conflicting comments on this site and others regarding the proper kit to use. Will 50087-53 work for a truck with the 502A package, or is 56034-53 the one that actually fits? Thanks

asked by: Travis M

0

Expert Reply:

I checked with Reese just now and for your 2021 Ford F-150 6-1/2 foot bed the only fifth wheel rail kit that fits is the part # RP56034-53. The other rail kit you mentioned does not fit your truck.

expert reply by: Jameson C

0

Answer 1

Since you mentioned the cotter pins which are used to secure the feet inside the rails, that makes me that you are referring to the connection point between the rail and foot on one of the four corners of the Curt A20 5th Wheel Trailer Hitch part…

view full answer...

Answer 2

I want to start off by saying that any trailer lock that you purchase will never be able to fully secure your trailer from a thief. If they are determined enough to bring equipment with them to remove a lock then given enough time they will be able…

view full answer...

Answer 3

In regards to fifth wheel base rails, the way the fifth wheel hitch attaches to them will be the same across brands but not the way they attach to the frame brackets therefore you cannot mix and match base rails and frame brackets. If you already…

view full answer...

Answer 4

Yes the Master Lock Stainless Steel Padlock #ML40D is compatible with the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33. I attached a picture that shows both of these products used together.

view full answer...

Answer 5

We do have Curt 5th wheel base rails with an installation kit that fits your 2021 Ford F-150, though I checked with Curt, and the base rails you asked about aren't a fit for the '21 F-150. Instead, I verified that the correct fit is the…

view full answer...

Answer 6

The best custom rail kit with the highest capacity for your 2022 Ford F-150 is going to be the Curt Custom Fifth Wheel Installation Kit for Ford - Gloss Finish item #C93WR. These custom brackets mount beneath your truck bed to provide attachment…

view full answer...

Answer 7

First you will need to ensure that the 5th wheel camper that you are wanting to tow does not exceed the towing capacity or tongue weight rating for your 2016 Ford F-150. You will likely need to contact a Ford dealership or check with their towing…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 12

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...