Will the Master Lock Hidden Shackle Padlock fit a Blaylock EZ Lock Trailer Coupler Lock # BLTL-33

Question

Question:

Will a Master Lock Hidden Shackle Padlock work with the pin?

asked by: Cb

0

Expert Reply:

Yes the Master Lock Stainless Steel Padlock # ML40D is compatible with the Blaylock EZ Lock Trailer Coupler Lock # BLTL-33.

I attached a picture that shows both of these products used together.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I want to start off by saying that any trailer lock that you purchase will never be able to fully secure your trailer from a thief. If they are determined enough to bring equipment with them to remove a lock then given enough time they will be able…

view full answer...

Answer 2

The best custom rail kit with the highest capacity for your 2022 Ford F-150 is going to be the Curt Custom Fifth Wheel Installation Kit for Ford - Gloss Finish item #C93WR. These custom brackets mount beneath your truck bed to provide attachment…

view full answer...

Answer 3

Since you mentioned the cotter pins which are used to secure the feet inside the rails, that makes me that you are referring to the connection point between the rail and foot on one of the four corners of the Curt A20 5th Wheel Trailer Hitch part…

view full answer...

Answer 4

We do have Curt 5th wheel base rails with an installation kit that fits your 2021 Ford F-150, though I checked with Curt, and the base rails you asked about aren't a fit for the '21 F-150. Instead, I verified that the correct fit is the…

view full answer...

Answer 5

First you will need to ensure that the 5th wheel camper that you are wanting to tow does not exceed the towing capacity or tongue weight rating for your 2016 Ford F-150. You will likely need to contact a Ford dealership or check with their towing…

view full answer...

Answer 6

In regards to fifth wheel base rails, the way the fifth wheel hitch attaches to them will be the same across brands but not the way they attach to the frame brackets therefore you cannot mix and match base rails and frame brackets. If you already…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...