How To Install The Curt T-Connector Wiring Harness In A 2002 Jeep Grand Cherokee
Question:
How do I locate the plug on my 2002 Jeep Grand Cherokee ?
asked by: LeAnne C
Expert Reply:
To install the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55369 you linked to in your 2002 Jeep Grand Cherokee without factory tow package you'll need to do the follow steps:
1. Remove the rear threshold seen in figure B/C
2. Remove the screws on the driver side trim panel and pull back the panel to gain access to the green vehicle harness (D,E,F).
3. Insert the green custom wiring connector housing into the green vehicle harness housing. Make sure the connectors are fully inserted with locking tabs in place by pushing the red lock tab to the side (G).
4. Locate a flat spot inside the vehicle, near the taillight. Adhere the black converter box using the provided double-sided tape (H). Insert the 10-amp fuse provided into the red inline fuse holder.
5. When in use, route the 4-flat to the center of the vehicle. When not in use, roll up and store in a convenient, out of the way location. Secure any loose wires with the provided cable ties.
I don't have an installation video of this specific wiring harness but I have attached an installation video for the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 42535, which is a similar wiring harness and will allow you to see all of these steps being done.
Products Referenced in This Question
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Hopkins
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Review of Hopkins Custom Fit Vehicle Wiring - Plug In Simple Vehicle Wiring Harness 4 Pole - 42535
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2021 Jeep Grand Cherokee
- Video: Trailer Wiring Harness Installation - 2002 Jeep Grand Cherokee
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Trailer Hitch Installation - 2003 Jeep Grand Cherokee - Draw-Tite
- Video: etrailer 4-Pole Flat Mounting Bracket Review
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Trailer Hitch Installation - 2002 Jeep Grand Cherokee
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: trailer wiring
- Shop: Front Mount Hitch
- Shop: Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
- Shop: Mounting Bracket 4-Pole Flat
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Adding Brakes to a Mobile Home Axle
- Article: My Trailer Hitch Doesn't Fit