What is the Difference in Hardness for the SM Arnold 5-Level Nylon RV Cleaning Brushes

Question

Question:

What is the difference in hardness with each color brush?

asked by: Jeff J

0

Expert Reply:

I went out to the warehouse to check the hardness for each of the brushes. The Replacement Head for SM Arnold 5-Level Nylon RV Cleaning Brush # 38183-043 (Blue) was the softest brush. The Replacement Head for SM Arnold 5-Level Polyester RV Cleaning Brush # 38183-045 (Gray) was in the middle. Making the Replacement Head for SM Arnold 5-Level Polystyrene RV Cleaning Brush # 38183-041 (Yellow) the hardest.

expert reply by: Thomas M

0

Answer 1

Yes the SM Arnold 5-Level Vehicle Cleaning Brush with Telescoping Flow-Thru Handle #38183-038 can totally shut off the water using the adjustments in the handle.

view full answer...

Answer 2

We don't have a database that tells us what will fit on which coach, so you'll want to measure to confirm fitment. For example, if you have 8" round feet, select the #SP34FR4. If you have 10" round feet, you will want to select the…

view full answer...

Answer 3

One thing to note when using a hitch extender like the etrailer, #e88YR, is that the tongue weight and towing capacity of your trailer hitch will be reduced by 50 percent due to the increased leverage that is placed on your trailer hitch from your…

view full answer...

Answer 4

Having the soap come directly from the brush while scrubbing would be very convenient however there currently aren't any foam sprayers that are modeled to be attached to a flow through brush but the Griot's Garage Foaming Sprayer for Vehicles…

view full answer...

Answer 5

The Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels, #ORJW350D has an overall length of 18".

view full answer...

Answer 6

The 4.80-12 tire has a section width of 4.80" and an outer diameter (when inflated) of 20.5". The 5.30-12 tire has a 5.3 inch section width and outer diameter of 21.5 inches, so it will change both the height and width of the tire. If you…

view full answer...

Answer 7

You should be fine as most people do not have trailer wheels and tires balanced, but if you are having a shop mount the tires, and you want to have them balanced, it probably would not cost much more to have the setup balanced as well. One reason…

view full answer...

Answer 8

Hi Tyler, When adding in air springs on a lifted vehicle the proper way to determine the correct sized spacer is to first install the upper and lower brackets and then measure the distance between them and subtract the height of the air spring bellow…

view full answer...

Answer 9

If you remove the hub and wipe away the grease on the spindle you can check to see if it is damaged. Look for an scarring, gouges, discoloration, or scoring on the spindle. If the spindle is damaged then the bearings won't ride properly and can…

view full answer...

Answer 10

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What is the Difference in Hardness for the SM Arnold 5-Level Nylon RV Cleaning Brushes

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching