Distance Between Mounting Holes of etrailer Hitch # e98840

Question

Question:

Id like to use this on an off road buggy instead of making one myself and this looks to be exactly what I need. How wide or far apart are the mounting holes, left to right? How far does the hitch extend down and out from the rear edge of the mounting bracket? Thank you!

asked by: Christopher P

1

Helpful Expert Reply:

I did some checking and the distance between the mounting holes of the etrailer hitch # e98840 that you referenced is 40.15 inches. The hitch opening hangs 7-1/2 inches below the mounting flange.

expert reply by: Jameson C

1

Bolt Hole Dimension
(click to enlarge)

Answer 1

Most likely you had some corrosion or dirt in the threads of the weldnuts of your 2015 Acura MDX which was causing the bolts to not be able to thread all the way in. This is a pretty common issue which affects the install of trailer hitch hardware. I…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

To add a hitch to your 2024 Honda Pilot, I recommend the etrailer item #e27KR. This hitch is custom fit and bolts to your Honda with included hardware. I really like the etrailer hitch item #e27KR because it installs behind your rear bumper cover and…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Yes, the etrailer hitch #e98840 that fits your 2022 Honda Pilot does allow the hands free rear liftgate to still function once installed. You would just need to kick to either side of the hitch opening.

view full answer...

Answer 10

Yes, there is a trailer hitch receiver that fits your 2024 Honda Pilot, from Curt, at the following part number: - Curt Trailer Hitch Receiver #C22HR I verified this fit directly with the manufacturer for you.

view full answer...

Distance Between Mounting Holes of etrailer Hitch # e98840

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching