etrailer.com Trailer Hitch Installation - 2020 Honda Pilot Video

The etrailer Hitch item #e98840 weighs 49 lbs. You will want to torque the bolts to 139 lb-ft. The etrailer Hitch item #e98840 is confirmed to fit the 2021 Honda Pilot. I have linked an installation video below to help you get this hitch installed.…

The trailer hitch I recommend for a 2020 Honda Pilot is the etrailer Trailer Hitch Receiver part #e98840. I have installed all of the available trailer hitches on this very same vehicle and this was my favorite option. I have attached an install…

There are 3 hitches made for the 2003 Honda CRV. They each are designed differently and they each have different hardware kits. There are three Class III hitches, the Draw-Tite #75690, the Curt #13535, and the etrailer Hitch #e69AR. You can order the…

On your 2019 Honda Pilot, the blue wire and quick connect of harness #118760 should have a mating quick connect in the rear cargo area if you have the backup sensors. It plugs in to the mating vehicle connector, next to the main tow package connector…

Installing the trailer wiring on your 2019 Honda Pilot is a pretty straightforward process; if you can install the etrailer Trailer Hitch #e99044 on your Pilot I'm very confident you can also install the T-One Vehicle Wiring Harness #118760. To…

For your 2021 Honda Pilot Special Edition we have the etrailer hitch part #e98840 that is a confirmed fit and is mostly hidden. It will allow you to keep your current spare as long as it's smaller than the 18 inch wheel size.

By auto tailgate sensor I assume you are talking about the hands-free liftgate on your 2019 Honda Pilot Elite. To install the Curt Trailer Hitch #C13146 on a '19 Pilot, you will need to move the sensor if you want to retain functionality of your…

In order to retain full functionality of the handsfree liftgate function after the Curt Class III Trailer Hitch part #C13146 has been installed on the 2020 Honda Pilot, you will need to install a sensor relocation kit. It is available directly…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I spoke with my contact at Snowsport about the Hold Down Strap, #A60220. He stated that the strap does not have a specific weight capacity but it is strong enough for its intended purpose This strap is designed for use with Snowsport ATV, UTV, ZTR,…

I can see why the instructions might be confusing and unfortunately we don't currently have an installation video of the #118286 on a Honda Pilot with the backup sensor available, but I can help you. If you check out image D on the instructions…

The instillation of the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector Item #118286 on a 2019 Honda Pilot is going to be the same as the 2017 and the 2020. The installers in the videos talk about the connector with the…