bing tracking image
Q & A Icon

Winch and Extension Needed for Operating Pop-up on 1998 Starcraft Starlounger  

Question:

My popup camper had its old winch in the back of the camper with a large extension bar connected to the winch that you could connect the handle to lift the top from the back side of the camper. All four cables connected to the one winch. I know that this winch is not available anymore. I have rerun the cables so now one cable can pull up the top. I tried to use an electric winch but I think I would prefer to have a hand crank. I have decided to move the winch location to the front of the camper under the propane tanks. My problem is that I believe I will need some kind of extension to the crank handle so that I can do the manual crank. Is there something available that can be used to extend the crank length? If so what is the lengths available? Thanks for your help.

0

Expert Reply:

Great question!

I believe that you're wanting to extend that handle out horizontally so that you aren't having to 1 - get on your hands and knees while operating the winch, and 2 - having to keep removing and installing the handle because it will make contact with your trailer frame during operation. For the Dutton-Lainson Hand Winch # DL14934 there aren't any extensions but you could use either the Drill Drive Socket Adapter # DL6456 or the Ratcheting Replacement Handle # DL70347 to help make operating the winch a little easier.

An alternative solution would be to use the Pro Series Winch # PSKR10000301 which will accept a 7/8" socket, so you can use a standard socket and extension for this winch.

expert reply by:
0
Jon G

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>