bing tracking image
Q & A Icon

Troubleshooting Installation Of Furrion Side Maker Cameras On A 2021 Grand Design Momentum 350G  

Question:

I attempted to install the Furrion S side cameras on our 350G. The LED marker lights have only black and white wires. The black wire should be ground, with the white wire being for power to the light, correct? I wired black to black, and brown and red to white. Neither the light nor the camera works. What did I do wrong?

0

Expert Reply:

I would first start by turning your running lights on and using a circuit tester # PTW2992 check which wire (black or white) is your power. From my experience you can't always just go off of the standard wire color for power/negative as manufacturers love to complicate things. Once you know which wire is your power you can wire the Red and Brown wires from the LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems # FCE48TASL to it and the black to the ground wire.

Red (V+_Camera): to the positive wire of the running light circuit.
Black (GND): to ground.
Yellow (Trigger): to left/right turn signal [only available for LED versions].
Brown (V+_Lamp): to positive wire of the running light circuit.

I've attached a video below to help you with this installation as well. If this does not solve your issue then please reply back and we can troubleshoot this problem further.

expert reply by:
0
Kevin C

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>