How To Power Furrion LED Marker Light Camera When Trailer Isn't Connected To Tow Vehicle
Question:
Do the side marker lights come on when I want to use the cameras with the motion detector add-on? How to you route power to the Furrion camera equipment when not plugged into the truck?
asked by: Mark
Expert Reply:
If you wire the camera wire of the LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems # FCE48TASL you were looking at to the running light circuit then the running light will be on any time the camera is on as that is where the power is coming from.
Now since you are wanting the camera to work even when the trailer is unplugged I recommend wiring the running light wire from the camera to the factory running light wire, and then running a new wire using # 16-1-1 from the camera wire to a switch like the # PK34308 and then from the switch the battery on your trailer. This will allow you to turn the camera portion of the # FCE48TASL by turning on the switch and it will work even if the trailer is not connected to your truck. The only down side of this is you will need to turn the switch on while you are towing for the camera to work, but is the only way to have the camera work without your trailer being connected to the truck.
I included a video of the # FCE48TASL for you to take a look at.
Products Referenced in This Question
Pollak Universal-Design Rocker Switch - SPST - On-Off - 12 Volt - 20 Amp - Black
- Accessories and Parts
- Wiring
- Switches
- Rocker Switches
- 20 Amp
- Pollak
more information >
Product Page this Question was Asked From
LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
- Accessories and Parts
- RV Camera System
- Camera
- Side Camera
- Right Side Camera
- Left Side Camera
- Black
- Furrion
more information >
Continue Researching
- Shop: MORryde Safe-T-Rail Telescoping RV Hand Rail
- Shop: RV Camera
- Search Results: furrion door camera
- Search Results: furrion camera
- Search Results: furrion side camera
- Q&A: Is There a Spacer For the Furrion Vision S Side Cameras To Work On a Recessed Application?
- Q&A: What is Yellow Wire For on Furrion LED Marker Light RV Side Cameras
- Q&A: Is It Possible to Turn Furrion Side Camera Observation System into Motion Sensor Camera
- Q&A: Can Just the Camera of the Furrion Vision S Side Camera w/ Light Bracket # FCE48TAS Be Installed
- Q&A: Can You Wire In a 4th Camera in Toy Hauler Garage
- Q&A: Why Isn't Angle of Cameras on Furrion Side Marker Camera Kit # FCE48TASL Adjustable
- Q&A: Installation Videos for Furrion LED Marker Light RV Side Cameras
- Shop: Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1
- Shop: Pollak Universal-Design Rocker Switch - SPST - On-Off - 12 Volt - 20 Amp - Black
- Shop: LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
- Shop: Furrion Vision S Wireless RV Backup Camera System w/ 3 LED Marker Light Cameras - 7" Screen
- Shop: Blackstone Griddle Portable Stand with Side Shelf for 17" and 22" Griddles
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 44649
- Shop: Grease Seals 10-36 (pair)
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Search Results: dust cap
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Video: Choosing the Best Fifth Wheel Hitch
- Search Results: 68149
- Shop: Fifth Wheel Hitch
- Article: Trailer Maintenance Schedule