MoRryde CRE3000 Equalizers on 31 Inch Tandem Axle Spacing

Question

Question:

Im looking at equalizer hangers for my tandem axle travel trailer. Morryrde CRE 3000 and similar. Seems that most of these are available for either 33 or 35inch axle spacing. Mine measures about 31-inches. Do I need to look into having the hangars relocated to provide 33-inch spacing? Will the CRE3000 work with 31-inch spacing?

asked by: Justin

0

Expert Reply:

I just spoke with my rep at MORryde and she said that you are able to use the CRE3000 MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K item # MR87ZR on a tandam axle trailer with 31 inch spacing if your are using 24 inch leaf springs.

expert reply by: Jerred H

0

Answer 1

If the touch pad is showing "Retract Time out Return Levelers for service" all you need to do is hit, enter and retract at the same time. That will clear that code. I confirmed this with our contacts at Lippert. Let me know if that…

view full answer...

Answer 2

I spoke with my contact at Dexter and the 6,000 pound axle rating on the E-Z Flex Heavy Duty Rubber Suspension System #K71-652-00 has more to do with fit than the actual capacity on the equalizers. Heavier duty axles will typically have different…

view full answer...

Answer 3

Nope, heavy-duty shackle straps are either 2-1/4" or 3-1/8", so the closest heavy-duty shackle strap to 2-3/4" would be the the 3-1/8" long, 1/2" thick Dexter Heavy-Duty Shackle Link #DX55FR. This option…

view full answer...

Answer 4

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but…

view full answer...

Answer 5

So long as other dimensions match, you can replace your 2 inch wide leaf spring with the narrower 1-3/4 inch leaf spring, though if you have any added movement with the narrower spring, which is possible, you will want to change out your hangers as…

view full answer...

Answer 6

Based on the axle capacity and dimensions of the current springs the correct replacement would be the #e47SR.

view full answer...

Answer 7

The Lippert frame does not necessarily indicate you have Lippert axles, but since you have the capacity and other measurements it isn't a concern. The manufacturer information for your axles would be found on your axle tag. With…

view full answer...

Answer 8

Yes, you can use the Dexter E-Z Flex Suspension Kit #K71-652-00 with 31 inch axle spacing because these equalizers are a match for your current Equalizer #TREQ104. We have contacted Dexter about this previously and so long as the equalizers are the…

view full answer...

Answer 9

I have attached a parts list of everything you need including quantities below to replace the leaf springs, equalizers, shackles, and bolts on your 2002 Fleetwood Mallard 20N. Leaf Springs: Double-Eye Spring part #e59SR (4) Equalizers: Curved…

view full answer...

Answer 10

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 11

The correct equalizer upgrade kit for your 2016 Surveyor 247BHDS is the one that is the closest match to your current equalizer. I'm not 100% sure what your 5-1/2" measurement was but it sounds like the Dexter E-Z Flex Suspension Kit -…

view full answer...

Answer 12

Thank you for all of the info you listed and the pictures. Based on that the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR is the correct fit. Your trailer does not have the Correct Track setup on it. There would be a height difference…

view full answer...