Routing the Curt C56040 Wiring Harness Outside of a 2022 Subaru Outback Wagon
Question:
I have a 2022 Subaru Outback Limited XT and will be installing a C56040 wire harness and an ETBC7L 7-way adapter so that I can add a C51180 wireless brake controller. My question is, how do I route the wires/4-pin connector of the C56040 to go under/outside of the vehicle in order to hook up the ETBC7L vs. simply draping wires over the weather seal of the hatch?
asked by: Tom W
Expert Reply:
The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat # C56040 is usually stored inside the truck section of your 2022 Subaru Outback Wagon, but it doesn't have to be. Especially as you will be upgrading the 4 Flat to a 7 Way.
Typically there will be a rubber plug under the spare tire that can be popped out for water drainage. It can be a little difficult to get passed through, but the 4 Flat plug can be run through this hole so it can be stored outside the vehicle. This will make installing the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7L significantly easier. One potential add on to mount the 7 Way will be the Tow Ready No-Drill Mount Bracket, Long # 18136. The included hose clamp makes this easy to mount an any hitch.
I included an install video of the # C56040 on a 2021 Outback Wagon showing the referred to plug that should help as well.
Products Referenced in This Question
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
more information >
7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Installing a 7-Way Connector on a 2020 Subaru Outback Wagon for Towing a Trailer
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Brake Controller and Wiring for a 2020 Subaru Outback Wagon
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Curt Cam Buckle Stabilizing Strap Test Course
- Shop: Suspension Enhancement
- Shop: Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Shop: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Rear Axle
- Q&A: Will Curt T-Connector Wiring Harness C56040 Provide Power Supply To Trailer
- Q&A: What Is The Easiest Trailer Brake Controller To Install In A 2021 Subaru Outback Wagon?
- Q&A: Is Curt Class III Hitch C67JR The Same Hitch As Curt 13494
- Shop: Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2021 Subaru Outback Wagon
- Video: etrailer Class III Trailer Hitch Installation - 2022 Subaru Outback Wagon
- Video: Best 2020 Subaru Outback Wagon Trailer Wiring Options
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2020 Subaru Outback Wagon
- Shop: Brake Controller
- Q&A: Recommended 7-way Connector For 2020 Subaru Outback With 12v Power For Trailer Battery
- Q&A: Best 4-Way Trailer Wiring Kit for 2020 Subaru Outback Wagon
- Search Results: etbc7
- Video: Coil SumoSprings Rear Axle Helper Springs Review
- Video: Tow Ready Tools - Hitch Tools - 80103-1 Review
- Search Results: hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer hitch