What Is The Hub Pilot Diameter Of The Trailer Idler Hub Assembly AKIHUB-655-35-EZ-K?
Question:
You need to show the the size of all the hub pilots any time you are including hubs, so that people will know if their wheels center bore will fit correctly without spacers or if it will even fit at all. I am upgrading my boat trailer and find myself here often.
asked by: JOHN G
Helpful Expert Reply:
I would be happy to help!
On the Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K you were looking at the hub pilot has a 3" O.D. as shown in the included diagram. You will need to make sure the pilot hole in your wheel is larger that 3" for this to work properly.
If there is a different hub you need this measurement from please just let me know.
I included a video of the # AKIHUB-655-35-EZ-K for you to take a look at.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Wiring
- Q&A: How To Use Toyota TRD Pro 17 Inch Wheels With Hubs On a Dexter 3,500 Lb Axle
- Q&A: Idler Hub Recommendation for a Trailer that has # 84 Spindles
- Q&A: Will Chevrolet 6-on-5-1/2- Bolt Pattern Wheels Fit Trailer Idler Hub Assembly AKIHUB-655-35-K
- Shop: Grease Cap, 1.988" OD Drive In - Qty 2
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Shop: Grease Cap, 2.44" OD Drive In - Qty 2
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Wiring Junction Box - 7 Terminals - Polypropylene
- Search Results: axletek bd2 655
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-35-EZ-K Review
- Video: etrailer Trailer Hub and Drum Assembly Review and Installation AKHD-655-35-EZ-K
- Video: Bearing Repacking and Grease Seals Installation
- Q&A: What is the Difference Between 1.25 Inch Trailer Bearings
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer brake controller
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Choosing the Right Brake Controller
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: l68149
- Article: How to Choose the Right Trailer Hitch Class