Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Roadmaster's crossbar-style brackets are virtually invisible, easy to mount and simple to remove. Brackets install on your vehicle's frame to provide attachment points for your tow bar.
Features:
The drawbars, or front arms, on the crossbar-style series base plate kit are supremely easy to mount and remove. Just insert them into the brackets and twist to lock them in place. To remove, simply twist the arms back and pull them out. Once the drawbars have been removed, the remaining brackets are virtually invisible. On most automobiles, the brackets are mounted within the grille, where they remain not only unseen, but protected from scrapes and scuffs, as well.
Average Customer Rating: 4.8 out of 5 stars (877 Customer Reviews)
Roadmaster's crossbar-style brackets are virtually invisible, easy to mount and simple to remove. Brackets install on your vehicle's frame to provide attachment points for your tow bar.Great product for my 2014 Wrangler. Good materials, solid attachment to vehicle, and looks good. The e trailer installation video was great for assisting installation. Made the install much quicker and easier. The most difficult procedure for me was disconnecting the wiring harness on the back of the bumper. An old tack puller (or tool of similar design) would have been great for leveraging the pins out of their holes. Cutting the air dam was a slow process to ensure I didn't cut too much. A paper template to mark where to cut the air dam would make this process much simpler. Again, I can't emphasize enough how great the installation video was for making the steps easier.
etrailer service was great. Received my Roadmaster base plate in 3 days. The directions from Roadmaster were fair, but etrailer's video was excellent. I had trouble mounting my base plate as the space between the two baseplate ends were too tight. I needed to use a floor jack and bottle jack to get it on. Once it was in position everything went together fine. I trimmed the Jeep' air dam differently keeping the ends that Roadmaster wants you to cut off. I think it looks better. I also had to modify the center cut in the air dam to accommodate the breakaway switch I have.
Jeffrey
10/29/2018
Base plate has been working out great. Easy putting on and taking off.
Bought this product from etrailer with free shipping it was cheaper than I could get in town.. The baseplates are perfect for our 2014 Jeep Wrangler and our stowmaster 5000 tow bar. The unit is built to last with heavy steel plate and nice welds. Installation is pretty easy, you just have to remove the plastic air dam, and trim it up. Etrailer has a great video going over the install. I am pretty picky, and I didn't care for the way Roadmaster has you cut the air dam. If you take your time and look at photos of the way they cut it when you have your air dam off you can make it look much better. I have enclosed pictures of my install so you can see the difference. I am very happy with the ez-4 baseplates and etrailer
I purchased this EZ4 base plate to work in conjunction with the Falcon2 tow bar. It fit perfectly on my Wrangler Unlimited, and is tucked mostly out of site when not used. The two baseplate arms bolted to the cross bar of the Falcon2 are easily removed and stored away when not in use. Installation because of the weight and tight fit to the Wrangler frame, was found to be much easier with two people.
Installed this baseplate on my 2016 Jeep Wrangler Sport unlimited for use with the Roadmaster StowMaster tow bar. After some confusion as to which baseplate (RM-521448-5 or the -4) to order, I finally got all of the components and have the vehicle “tow ready”. Baseplate install is simple, but make you you measure for the cut-out in the rubber rock plate. Directions say the cut-outs should be 9” long...make them 6”.
I also ordered and installed the Hopkins 56200 light kit which is a very easy install except for routing the wiring to the front. If you can get the vehicle on a lift it would be much easier. All together it took me about 5.5 hrs to complete the install and I did it all alone (65 years old). A younger person could probably cut an hour to 90 minutes off my time.
Installed on a 2015 Wrangler JKU.
Overall was an easy install with just one minor difficulty. The minor issue I had was with the 1/2” Tab Weldnut with rod (item # 16 in parts Diagram). This weld nut goes into a section of the Jeep frame that is boxed in and limited access to it hence the rod attached to it used for placement! This weld nut wanted to turn while tightening and was a little difficult to get it to tighten. It’s not designed for a wrench but I was able to get a 3/4 in open end wrench on the plate part of it and hold it for tightening. I think the intent in design is that it will turn up against the wall of frame and hold it from turning. It’s about 3/4 to short to contact the frame. This is a minor problem when installing the bottom side plate bolt on each side.
The baseplate fit very nicely and all holes lined up perfectly. Very well constructed and finished.
I trimmed the rock guard a little at a time to fit and can say that the instructions are good but say to remove a little more than needed on the depth. Take your time and trim a little at a time and trial fit it each time.
Very happy with product!
I'm giving it 4 stars instead of 5 only because of documentation. Need a video for the E4 bracket installation on a 2010 Jeep Wrangler. I did it all ... a diode wiring kit ... the tow bar and bracket installation ... and converted the Motorhome from a separate to a combined wiring system while adding a charge wire ... it took me two days. Very happy with the quality of the tow bar and bracket.
Great product...Good fit and appearence. The installation instructions were FAIR at best. There are alot of missing steps in the instruction sheet, so if you are not talented with tools let a professional tackle this job. Also if you are going to install these brackets yourself, I suggest that you raise the vehicle up on jack-stands or up on a lift. I did this install while all 4 tires were on the floor and it was very difficult to reach some of the bolts in order to tighten them. The most difficult part of this install is placing the front bumper back to it's original position. It can be done, but it is best to have a helper...you will have to apply some force!!
Take your time and test fit everything, hope this helps.
Ken
The processes ordering, packaging, shipping, were all completed without problems. The -4 baseplate kit for my 2016 jeep wrangler fit as advertised and connected to my road master 10,000 lb tow bar without a problem. Thanks, Ron C.
Easy to install and looks good when mounts are on or off. There are some very small rust spots from where the coating has worn off but great product.
Justin
10/12/2023
Had an issue you can read more in review of stow and go tow bar. This product is fine but throw out the junk pins they supply and install something like a padlock to secure your tow bar to these base plates. When a pin comes out it will be an expensive day for you.
Mike L.
11/4/2023
Helpful Links
Installed Perfectly
The Roadmaster base plate kit is well made and fit the Jeep JK very well. The assembly instructions were detailed and accurate with the exception of how to cut the plastic splash/rock guard under the bumper. I questioned the dimensions provided and checked prior to cutting. I was able remove less material resulting in a better fit.
The threaded plates with wire attached are not long enough to prevent spinning when torqueing the bolts attaching the bracket to the vehicle frame. I was able to use a 7/8 open end wrench to hold the plates while torqueing the bolts. A little frustrating but as there isn't much room to access the upper plate. Roadmaster should consider manufacturing those plates longer to prevent spinning.
The customer service from Etrailer was excellent. Tammie expedited my order and provided notification when shipped and delivered. Tammie is a 5 star representative and I appreciate her attention to my order.
I recommend Roadmaster products and Etrailer.
Joe R.
9/15/2021
Still very satisfied with the roadmaster product.
The order was quickly and accurately filled, shipped, and tracked to final and quick delivery.
Part was a perfect fit and a simple install.
This was the EZ4 baseplate for a stowaway tow bar mounting to a Jeep Wrangler JKU. I am impressed with the Roadmaster last be of tow equipment, as it shows that they have gone the extra mile in making their parts fit and make a strong and safe connection between the motor home and towed vehicle
Kenneth
7/26/2021
Great. I sold the Jeep but when towing it, I felt very secure and my least worry would be a towing problem. Will buy again
Excellent product. Excellent service. Excellent installation instructions. A value product.
Other than that, I guess it's OK
Nice baseplate kit. Only problem is some of the holes didnt match up with the frame crossmember so additional holes had to be drilled . Nothing in the instructions referenced this. Also no mention of the Airconditioner lines that had to be move to place the top bolt thru the frame rails or that to drill the hole in the frame you have to raise the evap core or as an alternative measure and locate where the hole should be then drill from the blind side.
Sierra K.
2/8/2021
Thank you for your review. Referencing step 2 of the instructions it does say that due to manufacturing variances, the hole in the outside of the frame rail may not exist so some drilling may be required. As for the air conditioning lines and evap core, it sounds like your jeep has been slightly modified.
One of the best towing packages there is
fitmenr was perfect
very easy to install by myself in about an hour. all holes were already in the frame except for the 2 for the front lower cross bar. mine is a 2011 jeep other years may have them. Easy to drill had plenty of access room and easy to get to. looks good after install , sets back just far enough to hide most of it. very clean not sure i'm going to leave the the front splash shield on looks good with out it.
Don B.
10/1/2021
Working well no issues
This base plate bracket met my expectations in every way. Fits out of the way behind the bumper attached to the frame on my Jeep Unlimited. Well made and would recommend for anyone.
Martin S.
1/25/2017
Pulled my Jeep 10000 miles behind our motorhome last year and baseplate doing its job. Thanks, etrailer!
Delivery was excellent and extremely quick. Arrived in great shape within a couple of days after order and I ordered it late in the day. The website video was great because it showed exactly what was involved and how to do it. I asked questions and got prompt answers. Have not installed yet but after I do will share pictures of installation of unit on 2017 Jeep Wrangler Unlimited. This is the third unit I have ordered from these fine people, all with excellent results. If need be will order future needs from them.
John M.
4/20/2020
Worked great and looks good. Hardly notice it’s there when not using.
Good quality. A little difficult to install for one person. Another set of hands would make it easier. Follow the instructions to make sure that you do things in the proper order. I would buy this again.
Dale
3/17/2022
Still working as designed. Thanks
The brackets arrived quicker than the date scheduled. They were taken out of the box to verify all the parts were accounted for and they were.
Mike B.
3/4/2015
I have used it a bunch with no issues.It still meets my expectations. Thanks
Easy install to a point! Those wire nut attachments are necessary but don't hold good but I got it!
Great service and shipping from etrailer. Always a pleasure dealing with them.
Dave B.
6/6/2017
Works great easy install
Dave B.
6/6/2017
Works great easy install
The tow brackets were installed on a 2011 Jeep Wrangler Unlimited. Brackets are well made and the fit was excellant. The installation takes some time as you have to remove and reinstall the bumper and drill some 1/2" holes to get the Brackets mounted. The average homeowner who is a little mechanically inclined will have no problem. The only improvement that we see is with the instructions. Could of supplied a Template for cutting the plastic splash shield under the bumper. If you take you time with measuring the cuts the fit will be excellant.
Do you have a question about this Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob T.
4/20/2015
This item works great. Have towed about 4500 miles using it. I couldnt be happier with the results.