How To Use Toyota TRD Pro 17 Inch Wheels With Hubs On a Dexter 3,500 Lb Axle
Question:
i have a new [ B Wise ] 4x8 utility trailer ...3.5k dexter axle 5 lug ..the wheels are toyota trd pro 17 inch 6 lug ...my concern is the center of the wheel fitment over the hub . THIS IS A OFFROAD BUILD 1200 lb max gear and 4wheeler...THANK YOU FOR YOUR TIME
asked by: Chris
Helpful Expert Reply:
The wheel bore can be an issue but the bigger concern I see right off the bat is that you have 5 lug hubs and want to use 6 lug wheels. Therefore, we need to get you the correct hubs first before you can address the hub bore difference. The good news however is that you can upgrade to 6 on 5-1/2" bolt pattern with the Dexter Trailer Idler Hub Assembly part # 84655UC1-EZ. According to my research, the Toyota TRD Pro 17" Wheels have a 6 x 139.7mm bolt pattern which is the same as 6 on 5-1/2" so they will work in this regard.
In regards to hub bore, the above requires at least a 3.09" opening in order to be compatible but it can be bigger, just not smaller.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Q&A: Will Chevrolet 6-on-5-1/2- Bolt Pattern Wheels Fit Trailer Idler Hub Assembly AKIHUB-655-35-K
- Q&A: Idler Hub Recommendation for a Trailer that has # 84 Spindles
- Shop: Trailer Wiring
- Q&A: What Is The Hub Pilot Diameter Of The Trailer Idler Hub Assembly AKIHUB-655-35-EZ-K?
- Shop: Grease Cap, 1.988" OD Drive In - Qty 2
- Shop: Grease Cap, 2.44" OD Drive In - Qty 2
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Search Results: keyed alike hitch lock
- Shop: BOLT brand vehicle and hitch locks
- Search Results: timbren
- Q&A: Where to Measure to Pick Out Replacement Hubs for a Trailer
- Q&A: Diameter of Outside Center Hub Bore for Dexter 3,500 lb Idler Hub # 84655UC1
- Q&A: How To Find Replacement Bearings, Races, And Seals For Lippert Axle
- Q&A: Hub Bore Diameter of Trailer Hub and Drum Assembly AKHD-655-35-K
- Search Results: 5x150 hub
- Search Results: 6 lug axle
- Search Results: idler hub
- Search Results: hitch
- Search Results: tru36fr
- Video: Review of Ark Straight Tongue Trailer Coupler - Articulating Off Road Coupler - AR44FR
- Video: Stallion Stabilizer Jacks Review
- Video: etrailer Stabilizer Jack Review
- Video: Optronics Trailer Plug Covers - 4 Flat Cover - ACP5B Review
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: Review of Ark Camper Jacks - Stabilizer Jack - ARK94FR
- Video: Hopkins Endurance Easy-Pull Y-Harness Review