Recommended 5 on 4-1/2 Lug Trailer Idler Hub For #84 Axle Spindle With E-Z Lube Grease Zerk
Question:
which non braking idler hub should i get this spindle with a 5 on 4 1/2inch bolt pattern?
asked by: Chris J
Expert Reply:
For the #84 E-Z Lube Spindle # TRU87FR, I recommend the Dexter Trailer Idler Hub Assembly # 84545UC1-EZ. This hub will include all the bearing races, bearings, lug nuts, grease seal, spindle nut, retaining washer, and dust cap with removable rubber insert for easy access to fill the hub from the grease zerk on the spindle.
If you are using this for a boat trailer or area where it will be subject to a lot of salt exposure the Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K is galvanized for better corrosion resistance. It includes the bearing races, bearings, lug nuts, grease seal, and dust cap with removable insert. You will need a Spindle Nut # 165686 and Tang Washer # 5-101 to attach the hub to the spindle.
Products Referenced in This Question
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Trailer Spindles
- EZ Lube Spindle
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: D Washer for EZ Lube Spindles
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Video: Review of TruRyde D Washer For EZ Lube Spindles - 5-23
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Q&A: How To Remove Trailer Spindle
- Shop: Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 3,500 lbs
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Replacement Trailer Hub Bearing - 14125A
- Q&A: Can a Trailer Grease Seal Be Pressed In Too Far Beyond Flush
- Q&A: Replacement Spindle Washer for an EZ Lube Spindle
- Q&A: Replacement Bearings, Races, Grease Seal and Tang Washer For 7,000LB Axle With Flat Spot on Spindle
- Video: Bearing Repacking and Grease Seals Installation
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Search Results: l44649
- Article: Trailer Tire Sizing
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: l68149
- Shop: Gooseneck Hitch
- Search Results: 10~36