Camper Tie Downs for 2021 Ford F-350 Short Bed with Extended Running Boards

Question

Question:

I just picked up my dream truck, a 2021 F350 short bed 6 foot 7, and have put down a deposit for a truck camper. The extended running board is one of my favorite options since I am only 57 and can use all the help vertically ! I am so happy to find out in the QandA, your expert mentioned Torklift has tie downs for F350 with extended running board however, the product details seem to indicate they only work with F350 with long 8 foot bed. I would like to find out if Torklift or other brands have tie downs solution for me. My local truck accessories shop told me the only option for me is to replace my extended running board with a shorter one : I will be interested to purchase them online and install myself if I can find the right parts. Thank you !!

asked by: Kevin C

0

Expert Reply:

We do have Torklift tie downs that fit your 2021 Ford F-350 short bed with full length step bars with the part numbers # TLF2022 and # TLF3008.

expert reply by: Jameson C

0

Answer 1

You're actually on the right track, here. The TorkLift Custom Frame Mounted Tie Downs #TLF2021 and #TLF2021A (aluminum) are a confirmed fit through TorkLift for the 2020 F-350 with the running boards that extend past the cab of the truck. Since…

view full answer...

Answer 2

The Torklift Camper Tie Downs #TLF2021 and #TLR3504 are only the correct option for your 2019 Ford F-350 Super Duty Crew Cab Dually 8' Bed if you have the TorkLift SuperHitch Magnum 30k Trailer Hitch Receiver Installed. If you have the factory…

view full answer...

Answer 3

The TorkLift Custom Frame-Mounted Camper Tie-Downs, #TLF2021 for the 2021 Ford F-350 Super Duty will come across the top side of the boards. Use TorkLift Custom Frame-Mounted Camper Tie-Downs, #TLF3008 for the rear of vehicle. Please note the linked…

view full answer...

Answer 4

Because you have the extended step you will want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLF2021 you stated and then TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TLF3008 to finish the set. If you want the TorkLift Talon…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Camper Tie Downs for 2021 Ford F-350 Short Bed with Extended Running Boards

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching