Determining Correct Frame Mount TorkLift Camper Tiedowns For 2019 Ford F-350 Dually With 8' Bed

Question

Question:

I ordered the TLF2021 and the TLR3504 to tie down our Lance 920 to our 2019 F350 Super Duty Crew Cab Lariat Dually, 8ft bed. Are these the right products for what we need?

asked by: Tanya S

0

Expert Reply:

The Torklift Camper Tie Downs # TLF2021 and # TLR3504 are only the correct option for your 2019 Ford F-350 Super Duty Crew Cab Dually 8' Bed if you have the TorkLift SuperHitch Magnum 30k Trailer Hitch Receiver Installed.

If you have the factory trailer hitch installed then you will need the # TLF2021 and # TLF3008, and if you have an aftermarket hitch that is NOT a TorkLift SuperHitch Magnum you will need the # TLF2021 and # TLR3500 instead.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The TorkLift Custom Frame-Mounted Camper Tie-Downs, #TLF2021 for the 2021 Ford F-350 Super Duty will come across the top side of the boards. Use TorkLift Custom Frame-Mounted Camper Tie-Downs, #TLF3008 for the rear of vehicle. Please note the…

view full answer...

Answer 2

Because you have the extended step you will want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLF2021 you stated and then TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TLF3008 to finish the set. If you want the TorkLift…

view full answer...

Answer 3

We do have Torklift tie downs that fit your 2021 Ford F-350 short bed with full length step bars with the part numbers #TLF2022 and #TLF3008.

view full answer...

Answer 4

You're actually on the right track, here. The TorkLift Custom Frame Mounted Tie Downs #TLF2021 and #TLF2021A (aluminum) are a confirmed fit through TorkLift for the 2020 F-350 with the running boards that extend past the cab of the truck. Since…

view full answer...

Answer 5

Yes, I checked with Torklift and for your 2017 Ford F-350 diesel with an 8 foot bed, factory hitch, and full length running boards the correct tie downs are the #TLF2021 and #TLF3008 that you referenced!

view full answer...

Answer 6

Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all…

view full answer...

Answer 7

The TorkLift Tie-Downs #TLF2012 and #TLR3503 are correct for your 2015 Ford F-350 Super Duty with the SuperHitch Original #TLF1002 as long as it's a short bed and you don't have a board or step that runs under the truck bed. These tie-downs…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...