Can You Use Two Adapters Together While Flat Towing A 2000 Jeep Wrangler TJ

Question

Question:

For the spare tire and flat tow my Jeep what are my options then since that carrier won’t work.

asked by: Jason S

1

Helpful Expert Reply:

Using two adapters together would lower the weight capacity by 50% so you wouldn't be able to flat tow your Jeep using the Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening # RM-195225 and a high low adapter.

expert reply by: Kevin C

1

Jason

8/27/2021

For the spare tire and flat tow my Jeep what are my options then since that carrier won’t work.

Reply

Kevin C.

8/27/2021

Since you won't be able to use multiple attachments between your 2010 Coachmen 23BB motorhome and 2000 Jeep TJ Wrangler you'll have to attach your Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening # RM-195225 to the hitch of your Jeep instead. If you don't have one currently you can install the Curt Trailer Hitch Receiver # 13408. This fully welded trailer hitch receiver bolts onto your Jeep TJ's frame with no welding required. The powder coated steel is sturdy and corrosion resistant. It has a tongue weight capacity of 400lbs and a GTW of 4,000lbs.

Reply

Answer 1

The shank of the Roadmaster Hitch Mounted Spare Tire Carrier, part #RM-195225 sits directly on top of the receiver you will attach your tow bar to. The receiver will lower your tow bar an additional 2-inches, so you will be at 3-inches if this…

view full answer...

Answer 2

The Roadmaster high low adapter part #RM-077-4 that you referenced has a 400 lb tongue weight rating so it would easily be able to handle the weight of your spare wheel and tire installed on the #RM-195225 you mentioned as well.

view full answer...

Answer 3

No, it is not ok to do that. The Roadmaster Hitch Mounted Spare Tire Carrier item #RM-195225 is built to use an accessory like a bike rack or flat tow a vehicle. It's not rated to do both. Plus the carrier already reduces your hitches tongue…

view full answer...

Answer 4

The Roadmaster Spare Tire Carrier #RM-195125 only has about 8 inches from the hitch pin hole to the back of the carrier and my understanding of Fiamma racks for motorhomes are that they are designed to sit pretty low when mounted on rails of…

view full answer...

Answer 5

Yes, you can use a high/low adapter such as Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 10K GTW, 400 lbs TW #RM-048-4 in combination with the Roadmaster Spare Tire Carrier #RM-195125. Just keep in mind the spare…

view full answer...

Answer 6

I believe you are asking if you can tow a trailer while using the receiver of the Roadmaster Spare Tire Carrier #RM-195125 and the answer is no because this carrier is only designed to be used for flat towing or an accessory such as a bike rack. For…

view full answer...

Answer 7

I am sorry to hear about the issue you are having while using your bike rack. I do have some options for you to display your license plate with the bike rack attached but Thule does not offer any products for this purpose. The vast majority of law…

view full answer...

Answer 8

To relocate your license plate if the Roadmaster Spare Tire Carrier #RM-195125 is blocking it, you can use the Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens #LPL55CB. This bracket does come with a 5 diode light that you…

view full answer...

Answer 9

You'll only need a license plate light like the #OPT77FR directly over the license plate, on whatever side of the trailer that you're mounting the plate. What the 2 on each side is referring to is that you could use 2 lights on each side of…

view full answer...

Answer 10

When the arms of the Roadmaster Nighthawk All Terrain #RM-676 are straight out they measure 40-1/2" retracted and 52" extended. This measurement is from the center of the hitch pin hole to the center of the base pin hole. Although there is…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Can You Use Two Adapters Together While Flat Towing A 2000 Jeep Wrangler TJ

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching