How Much Does The Draw-Tite Hitch Receiver For A 2021 Tesla Model Y Weigh

Question

Question:

Would you please confirm the actual weight of the hitch. 31 lbs listed seems light. Thank you,

asked by: Todd

0

Expert Reply:

That is the actual weight of the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2", part # DT58MR. This hitch receiver does not have the usual brackets that secure it to your vehicle, but it is not significantly lighter than any of our other more traditionally designed hitch receivers.

expert reply by: Mark Smith

0

Answer 1

The Draw-Tite Max-Frame Trailer Hitch Receiver#DT58MR is designed so that you can only see the hitch receiver so from what I'm finding you'll have to modify the rear bumper area to make room for a 7-Way on your 2021 Tesla Model Y.…

view full answer...

Answer 2

Yes. You can make connections to the battery on your 2020 Tesla Model Y in the same manner that you would on a standard, non-EV. You will need to start with a 4 way like the Tekonsha ZCI Kit #119250KIT which offers you a solution that…

view full answer...

Answer 3

The Draw-Tite #DT58MR and EcoHitch #EH39FR that will fit your 2021 Tesla Model Y have very little weight difference. The #EH39FR will weigh 35 pounds shipped, and the #DT58MR will be slightly lighter at 32 pounds shipped. Between the two, however,…

view full answer...

Answer 4

The EcoHitch #EH39FR for your 2022 Tesla Model Y does provide a much easier solution for removal of the appearance panel for access to the hitch opening compared to the Draw Tite #DT58MR. If you fast-forward to the 25 second mark of the attached…

view full answer...

Answer 5

In regards to the EcoHitch Invisi Trailer Hitch Receiver part #EH39FR which is a fit for a 2022 Tesla Model Y, the installation won't affect the reverse/backup sensors. That said, the system could be triggered when using a bike rack and placing…

view full answer...

Answer 6

The Draw-Tite #DT58MR is fairly similar to the EcoHitch #EH39FR in many respects including the design and installation, but the EcoHitch #EH39FR is made from an alloy of recycled materials where the Draw-Tite is made from steel. Typically the draw of…

view full answer...

Answer 7

I would be happy to help! For your sons 2012 Tesla Model Y I recommend the Tekonsha #119250KIT. It is a universal harness and would require quite a bit of extra work, but is the currently the only option available. This will pair up perfectly with…

view full answer...

Answer 8

I definitely have a recommendation for you to add both a trailer hitch receiver and wiring for your 2021 Tesla Model Y so you can haul your Wave Runner. The hitch I recommend is from Draw-Tite and the wiring harness from Tekonsha, with the correct…

view full answer...

Answer 9

Thank you for bringing this to our attention, I do see the Draw-Tite Max-Frame Trailer Hitch Receiver #DT58MR will fit your 2020 Tesla Model Y. This information is provided to us both from Draw-Tite and reviews we have received confirming fitment on…

view full answer...

Answer 10

The correct trailer hitch for your 2020 Tesla Model Y is the EcoHitch Invisi Trailer Hitch Receiver #EH39FR. The Draw-Tite Max-Frame Trailer Hitch Receiver #DT58MR you're looking at fits the 2021 and newer models. I did notice in the Draw-Tite…

view full answer...

Answer 11

In most cases Loctite is not required when installing a trailer hitch, but it would not be a bad idea. I suggest using the Loctite Blue Stick Threadlocker, #LT37643, which will provide a secure grip and protect against water and grime.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

How Much Does The Draw-Tite Hitch Receiver For A 2021 Tesla Model Y Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching