Compatible Hub Drum for Timbren TASR1THDS04 Axle-Less Suspension
Question:
Hello - I have the Dexstar Conventional Steel Wheel - 16inch x 6inch Rim - 6 on 5-1/2 - Black Powder Coat, which has a 4.27inch pilot diameter. Is there a Hub/Brake assembly that would match up well with this wheel, being installed on a Timbren 1Tonne HD axle-less system. My current Hub/Brake are 10inch diameter, but the wheel pilot does not rest on the center hub. It seems as though all of the weight will be held by the lugs.....is that ok?
asked by: Bryan G
Expert Reply:
I took the liberty of looking up your previous order, and saw that you purchased the Timbren # TASR1THDS04 axle-less suspension. The spindle on the # TASR1THDS04 is compatible with a standard 3.5K brake hub/drum like # AKHD-655-35-EZ-K. The wheels you ordered are meant to be stud piloted, not hub piloted so the # AM20758 Dexstar Conventional wheel you have would be perfectly compatible.
In other words, the wheel will work great with the hub/drum I recommended and the # K23-086-087-00 brake assemblies you ordered.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Dexter Electric Trailer Brakes - Parking Brake Ready - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 2200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Dexstar Conventional Steel Wheel - 16" x 6" Rim - 6 on 5-1/2 - Black Powder Coat
- Trailer Tires and Wheels
- Wheel Only
- 16 Inch
- 6 on 5-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out
- Shop: Westlake ST225/75R15 Radial Tire w/ 15" Liger Aluminum Wheel - 6 on 5-1/2 - LR E - Gray
- Shop: Ram Gooseneck to 5th Wheel Trailer Coupler Adapter - Round - 25,000 lbs
- Shop: Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets - 4" to 4-1/2"
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 4,500 lbs GTW, 450 lbs TW
- Shop: Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets - 4" to 4-1/2"
- Shop: Gooseneck Hitch
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Can TASR1THDS04 be Bought Without Spindles
- Q&A: Can Potable Water be Stored in Phoenix USA Water Container Jerry Can # PXPH3815
- Shop: Suspension Enhancement
- Shop: Trailer Wiring
- Search Results: 90160
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Brake Controller
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: leaf spring
- Article: Trailer Tire Sizing
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Video: Choosing the Right Brake Controller
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Do I Need Additional Fuses for the Main Fuse Box on a 2024 Honda Pilot to Power a Wiring Harness?
- Shop: Fifth Wheel Hitch
- Search Results: fender
on Trailer Tires and Wheels
