No Drill Trailer Hitch that Fits 2021 Mazda CX-30

Question

Question:

I am trying to confirm that this hitch installs on the CX 30 Turbo without the need to drill any holes. Could you please confirm if this is the case.

asked by: Robert

1

Helpful Expert Reply:

The Draw-Tite Sportframe Trailer Hitch Receiver # DT64MR has been confirmed to fit all models of your 2021 Mazda CX-30 including your Turbo model and it does not require any drilling either!

If you were in need of trailer wiring as well the Tekonsha T-One part # TK67FR is a confirmed fit and would work great as well as it is our most reliable option and is the easiest to install.

expert reply by: Jameson C

1

Answer 1

I recommend the Draw-Tite Trailer Hitch Receiver #DT44YR as the best for your 2022 Mazda CX-30. The receiver has a 2" opening allowing for a larger selection of hitch mounted accessories and ball mounts. It uses a hidden cross tube allowing for…

view full answer...

Answer 2

No, wiring the Tekonsha T-One Vehicle Wiring Harness #TK67FR you have to the battery of your 2021 Mazda CX-30 will not cause the battery to go dead due to it only powering the trailer lights when the vehicle is turned on. You will however have to…

view full answer...

Answer 3

The Draw-Tite Trailer Hitch #DT64MR you were looking at for your 2021 Mazda CX-30 can be used to tow a small trailer as long as it weighs less than 2000lbs and has a tongue weight of less than 200lbs. With that said Mazda calls out in the owner's…

view full answer...

Answer 4

We do have the T-One Vehicle Wiring Harness #TK67FR from Tekonsha which is designed to fit your 2021 Mazda CX-30. I have linked an installation video below for this on a 2022 CX-30 which shows it working with a Tester #I26.

view full answer...

Answer 5

I recommend the EcoHitch Hidden Trailer Hitch Receiver #EH55VR for your 2020 Mazda CX-30. This will receiver is custom fit for your Mazda and is capable of supporting the 3 bikes you need to carry. The Thule Helium Pro 3 Bike Rack #TH9043PRO is the…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver #C49CR has been confirmed to fit all models of your 2021 Mazda CX-30. This Class I hitch is designed for light duty towing and is rated for a maximum of 2,000lbs trailer towing and 200lbs of tongue weight, which far…

view full answer...

Answer 7

The trailer hitches that fit your 2022 Mazda CX-30 like the Curt #C49CR also fit the 2021 models. This also true for the Curt trailer wiring harness part #C86CR that you referenced.

view full answer...

Answer 8

Yes the Curt 1-1/4 inch hitch part #C49CR is a confirmed fit for your 2021 Mazda CX-30 Premium. It actually fits all models.

view full answer...

Answer 9

The most likely cause for the incorrect behavior of your trailer lights, where activating one turn signal causes all trailer lights to blink, is an insufficient ground (or a short to ground) on either the vehicle or the trailer. Since you re-wired…

view full answer...

Answer 10

You are correct that a trailer hitch is the best option for carrying 3 bikes with your 2021 Mazda CX-30. The trailer hitch that you need is the EcoHitch #EH55VR because the other options are Class I rated and those are only strong enough to carry 2…

view full answer...

Answer 11

First, use a circuit tester like #PTW2993 on your trailer connector as a helper activates each lighting function and operates the manual brake switch on the brake controller. This helps isolate the problem to the trailer or the tow vehicle. If…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...